Category: virtualization

Posted on

Server storage I/O Intel NUC nick knack notes – First impressions

Storage I/O trends

Server storage I/O Intel NUC nick knack notes – First impressions

This is the first of a two-part (part II here) series of my experiences (and impressions) using an Intel NUC ( a 4th generation model) for various things about cloud, virtual, physical and software defined server storage I/O networking.

The NUC has been around new for a few years and continues to evolve and recently I bought my first one (e.g. a 4th generation model) to join some other servers that I have. My reason for getting a NUC is to use it as a simple low-power platform to run different software on including bare-metal OS, hypervisors, cloud, virtual and software defined server storage and networking applications on that might otherwise be on an old laptop or mini-tower.

Intel® NUC with Intel® Core™ i5 Processor and 2.5-Inch Drive Support (NUC5i5RYH) via Intel.com

Introducing Intel Next Unit Computing aka NUC

For those not familiar, NUC is a series of products from Intel called Next Unit Computing that offer an alternative to traditional mini-desktop or even laptop and notebooks. There are several different NUC models available including the newer 5th generation models (click here to see various models and generations). The NUCs are simple, small units of computing with an Intel processor and room for your choice of memory, persistent storage (e.g. Hard Disk Drive (HDD) or flash Solid State Device (SSD), networking, video, audio and other peripheral device attachment.

software (not supplied) is defined by what you choose to use such as a Windows or *nix operating system, VMware ESXi, Microsoft Hyper-V, KVM or Xen hypervisor, or some other applications. The base NUC package includes front and rear-side ports for attaching various devices. In terms of functionality, think of a laptop without a keyboard or video screen, or in terms of a small head-less (e.g. no monitor) mini-tower desktop workstation PC.

Which NUC to buy?

If you need to be the first with anything new, then jump direct to the recently released 5th generation models.

On the other hand, if you are looking for a bargain, there are some good deals on 4th generation or older. likewise depending on your processor speed and features needed along with available budget, those criteria and others will direct you to a specific NUC model.

I went with a 4th generation NUC realizing that the newer models were just around the corner as I figured could always get another (e.g. create a NUC cluster) newer model when needed. In addition I also wanted a model that had enough performance to last a few years of use and the flexibility to be reconfigured as needed. My choice was a model D54250WYK priced around $352 USD via Amazon (prices may vary by different venues).

Whats included with a NUC?

My first NUC is a model D54250WYK (e.g. BOXD54250WYKH1 ) that you can view the specific speeds and feeds here at the Intel site along with ordering info here at Amazon (or your other preferred venue).

View and compare other NUC models at the Intel NUC site here.

The following images show the front-side two USB 3.0 ports along with head-phone (or speaker) and microphone jacks. Looking at the rear-side of the NUC there are a couple of air vents, power connector port (external power supply), mini-display and HDMI video port, GbE LAN, and two USB 3.0 ports.

NUC front viewRear ports of NUC
Left is front view of my NUC model 54250 and Right is back or rear view of NUC

NUC ModelBOXD54250WYKH1 (speeds/feeds vary by specific model)
Form factor1.95" tall
ProcessorIntel Core i5-4250U with active heat sink fan
MemoryTwo SO-DIMM DDR3L (e.g. laptop) memory, up to 16GB (e.g. 2x8GB)
DisplayOne mini DisplayPort with audio
One mini HDMI port with audio
AudioIntel HD Audio, 8 channel (7.1) digital audio via HDMI and DisplayPort, also headphone jack
LANIntel Gigabit Ethernet (GbE) (I218)
Peripheral and storageTwo USB 3.0 (e.g. blue) front side
Two USB 3.0 rear side
Two USB 2.0 (internal)

One SATA port (internal 2.5 inch drive bay)

Consumer infrared sensor (front panel)
ExpansionOne full-length mini PCI Express slot with mSATA support
One half-length mini PCI Express slot
Included in the boxLaptop style 19V 65W power adapter (brick) and cord, VESA mounting bracket (e.g. for mounting on rear of video monitor), integration (installation) guide, wireless antennae (integrated into chassis), Intel Core i5 logo
Warranty3-year limited

Processor Speeds and Feeds

There are various Intel Core i3 and i5 processors available depending on specific NUC model, such as my 54250WYK has a two core (1.3Ghz each) 4th generation i5-4250U (click here to see Intel speeds and feeds) which includes Intel Visual BIOS, Turbo Boost, Rapid Start and virtualization support among other features.

Note that features vary by processor type, along with other software, firmware or BIOS updates. While the 1.3Ghz two core (e.g. max 2.6Ghz) is not as robust as faster quad (or more) cores running at 3.0Ghz (or faster), for most applications including as a first virtual lab or storage sand box among other uses, it will be fast enough or comparable to a lower-mid range laptop capabilities.

What this all means

In general I like the NUC so much that I bought one (model 54250) and would consider adding another in the future for somethings, however also see the need to continue using my other compute servers for different workloads.

This wraps up part I of this two-part series and what this means is that I like the idea of a Intel NUC I bought one. Continue reading in part-two here where I cover the options that I added to my NUC, initial configuration, deployment, use and additional impressions.

Ok, nuff said for now, check out part-two here.

Cheers
Gs

Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press), The Green and Virtual Data Center (CRC Press) and Resilient Storage Networks (Elsevier)
twitter @storageio

All Comments, (C) and (TM) belong to their owners/posters, Other content (C) Copyright 2006-2023 StorageIO and UnlimitedIO LLC All Rights Reserved

Posted on

Server storage I/O Intel NUC nick knack notes – Second impressions

Storage I/O trends

Server storage I/O Intel NUC nick knack notes – Second impressions

This is the second of a two-part series about my first and second impressions of the Intel NUC (Next Unit Computing). In the first post (here) I give an overview and my first impressions while in this post lets look at options added to my NUC model 54250, first deployment use and more impressions.

Intel® NUC with Intel® Core™ i5 Processor and 2.5-Inch Drive Support (NUC5i5RYH) via Intel.com

What you will want to add to a NUC

Since the NUC is a basic brick with a processor mounted on its mother board, you will need to add memory, some type of persistent storage device (mSATA, SATA or USB based) and optionally a WiFi card.

One of the nice things about the NUC is that in many ways it is the equivalent functionality of a laptop or mini-tower without the extra overhead (cost, components, packaging) enabling you to customize as needed for your specific requirements. For example there is no keyboard, mouse, video screen, WiFi, Hard Disk Drive (HDD) or flash Solid State Device (SSD) included with an operating system pre-installed. There is no least memory required enabling you to decide how much to configure while using compatible laptop style memory. Video and monitors attach via HDMI or mini-port including VGA devices via an adapter cable. Keyboard and mouse if needed are handled via USB ports.

Here is what I added to my NUC model 5420.

1Crucial 16GB Kit (2 x 8GB) DDR3 1600 (PC3-12800) SODIMM 204-Pin Notebook Memory
1Intel Network 7260 WiFi Wireless-AC 7260 H/T Dual Band 2×2 AC+Bluetooth HMC. Here is link to Intel site for various drivers.
1500GB Samsung Electronics 840 EVO mSATA 0.85-Inch Solid State Drive
1SATA HDD, SSD or HHDD/SSHD (I used one of my existing drives)

Note that you will also need to supply some type of Keyboard Video Mouse (KVM), in my case I used a HDMI to VGA adapter cable to attach the NUC via HDMI (for video) and USB (keyboard and mouse) to my Startech KVM switch.

Following images show on the left Intel WiFi card installed and on the right, a Samsung 840 EVO mSATA 500GB flash SSD installed above the WiFi card. Also notice on the far right of the images the two DDR3 "notebook" class DRAM DIMM slots.

NUC WiFi cardmSATA SSD
Left: Intel WiFi card installed and Right Samsung EVO mSATA SSD card (sits above WiFi card)

Note that the NUC (as do many laptops) accepts 9mm or smaller thin 7mm height HDDs and SSDs in its SATA drive bay. I mention this because some of the higher-capacity 2TB 2.5" SFF drives are taller than 9m as shown in the above image and do not fit in the NUC internal SATA drive bay. While many devices and systems support 2.5" drive slots for HDD, SSD or HHDD/SSHDs, pay attention to the height and avoid surprises when something does not fit like it was assumed to.

2.5 HDD and SSDs
Low-profile and tall-profile 2.5" SFF HDDs

Additional drives and devices can be attached using external USB 3.0 ports including HDDs, SSDs or even USB to GbE adapters if needed. You will need to supply your own operating system, hypervisor, storage, networking or other software, such as Windows, *nix, VMware ESXi, Hyper-V, KVM, Xen, OpenStack or any of the various ZFS based (among others) storage appliances.

Unpacking and physical NUC installation

Initial setup and physical configuration of the NUC is pretty quick with the only tool needed being a Philips screw driver.

NUC and components ready for installation
Intel NUC 5420 and components ready for installation

With all the components including the NUC itself laid out for a quick inventory including recording serial numbers (see image above), the next step is to open up the NUC by removing four Philip screws from the bottom. Once the screws are removed and bottom plate removed, the SATA drive bay opens up to reach the slots of memory, mSATA SSD and WiFi card (see images below). Once the memory, mSATA and WiFi cards are installed, the SATA drive bay coverage those components and it is time to install a 2.5" standard height HDD or SSD. For my first deployment I installed temporarily installed on of my older HHDDs a 750GB Seagate Momentus XT that will be replaced by something newer soon.

NUC internal HDD/SSD slotNUC internal HDD installed
View of NUC with bottom cover removed, Left empty SATA drive bay, Right HDD installed

After the components are installed, it is time to replace the bottom cover plate of the NUC securing in place with the four screws previously removed. Next up is attaching any external devices via USB and other ports including KVM and LAN network connection. Once the hardware is ready, its time to power up the NUC and checkout the Visual BIOS (or UEFI) as shown below.

Intel NUC Visual BIOSIntel NUC Visual BIOS display
NUC VisualBIOS screen shot examples

At this point unless you have already installed an operating system, hypervisor or other software on a HDD, SSD or USB device, it is time to install your prefered software.

Windows 7

First up was Windows 7 as I already had an image built on the HHDD that required some drivers to be added. specifically, a visit to the Intel resources site (See NUC resources and links section later in this post) was made to get a LAN GbE, WiFi and USB drivers. Once those were installed the on-board GbE LAN port worked good as did the WiFi. Another driver that needed to be download was for a USB-GbE adapter to add another LAN connection. Also a couple of reboots were required for other Windows drivers and configuration changes to take place to correct some transient problems including KVM hangs which eventually cleared themselves up.

Windows 2012 R2

Following Windows 7, next up was a clean install of Windows 2012 R2 which also required some drivers and configuration changes. One of the challenges is that Windows 2012 R2 is not officially supported on the NUC with its GbE LAN and WiFi cards. However after doing some searches and reading a few posts including this and this, a solution was found and Windows 2012 R2 and its networking are working good.

Ubuntu and Clonezilla

Next up was a quick install of Ubuntu 14.04 which went pretty smooth, as well as using Clonezilla to do some drive maintenance, move images and partitions among other things.

VMware ESXi 5.5U2

My first attempt at installing a standard VMware ESXi 5.5U2 image ran into problems due to the GbE LAN port not being seen. The solution is to use a different build, or custom ISO that includes the applicable GbE LAN driver (e.g. net-e1000e-2.3.2.x86_64.vib) and some useful information at Florian Grehl site (@virten) and over at Andreas Peetz site (@VFrontDe) including SATA controller driver for xahci. Once the GbE driver was added (same driver that addresses other Intel NIC I217/I218 based systems) along with updating the SATA driver, VMware worked fine.

Needless to say there are many other things I plan on doing with the NUC both as a standalone bare-metal system as well as a virtual platform as I get more time and projects allow.

What about building your NUC alternative?

In addition to the NUC models available via Intel and its partners and accessorizing as needed, there are also special customized and ruggedized NUC versions similar to what you would expect to find with laptop, notebooks, and other PC based systems.

MSI Probox rear viewMSI Probox front view
Left MSI ProBox rear-view Right MSI ProBox front view

If you are looking to do more than what Intel and its partners offer, then there are some other options such as to increase the number of external ports among other capabilities. One option which I recently added to my collection of systems is an DIY (Do It Yourself) MSI ProBox (VESA mountable) such as this one here.

MSI Probox internal view
Internal view MSI ProBox (no memory, processor or disks)

With the MSI ProBox, they are essentially a motherboard with an empty single cpu socket (e.g. LGA 1150 up to 65W) for supporting various processors, two empty DDR3 DIMM slots, 2 empty 2.5" SATA ports among other capabilities. Enclosures such as the MSI ProBox give you flexibility creating something more robust beyond a basic NUC yet smaller than a traditional server depending on your specific needs.

Looking for other small form factor modular and ruggedized server options as an alternative to a NUC, than check out those from Xi3, Advantech, Cadian Networks, and Logic Supply among many others.

Storage I/O trends

First NUC impressions

Overall I like the NUC and see many uses for it from consumer, home including entertainment and media systems, video security surveillance as well as a small server or workstation device. In addition, I can see a NUC being used for smaller environments as desktop workstations or as a lower-power, lower performance system including as a small virtualization host for SOHO, small SMB and ROBO environments. Another usage is for home virtual lab as well as gaming among other scenarios including simple software defined storage proof of concepts. For example, how about creating a small cluster of NUCs to run VMware VSAN, or Datacore, EMC ScaleIO, Starwind, Microsoft SOFS or Hyper-V as well as any of the many ZFS based NAS storage software applications.

Pro’s – Features and benefits

Small, low-power, self-contained with flexibility to choose my memory, WiFi, storage (HDD or SSD) without the extra cost of those items or software being included.

Con’s – Caveats or what to look out for

Would be nice to have another GbE LAN port however I addressed that by adding a USB 3.0 to GbE cable, likewise would be nice if the 2.5" SATA drive bay supported tall height form-factor devices such as the 2TB devices. The work around for adding larger capacity and physically larger storage devices is to use the USB 3.0 ports. The biggest warning is if you are going to venture outside of the official supported operating system and application software realm be ready to load some drivers, possibly patch and hack some install scripts and then plug and pray it all works. So far I have not run into any major show stoppers that were not addressed with some time spent searching (google will be your friend), then loading the drivers or making configuration changes.

Additional NUC resources and links

Various Intel products support search page
Intel NUC support and download links
Intel NUC model 54250 page, product brief page (and PDF version), and support with download links
Intel NUC home theater solutions guide (PDF)
Intel HCL for NUC page and Intel Core i5-4250U processor speeds and feeds
VMware on NUC tips
VMware ESXi driver for LAN net-e1000e-2.3.2.x86_64
VMware ESXi SATA xahci driver
Server storage I/O Intel NUC nick knack notes – First impressions
Server Storage I/O Cables Connectors Chargers & other Geek Gifts (Part I and Part II)
Software defined storage on a budget with Lenovo TS140

Storage I/O trends

What this all means

Intel NUC provides a good option for many situations that might otherwise need a larger mini-tower desktop workstations or similar systems both for home, consumer and small office needs. NUC can also be used for specialized pre-configured application specific situations that need low-power, basic system functionality and expansion options in a small physical footprint. In addition NUC can also be a good option for adding to an existing physical and virtual LAB or as a basis for starting a new one.

So far I have found many uses for NUC which free up other systems to do other tasks while enabling some older devices to finally be retired. On the other hand like most any technology, while the NUC is flexible, its low power and performance are not enough to support other applications. However the NUC gives me flexibility to leverage the applicable unit of compute (e.g. server, workstation, etc.) that is applicable to a given task or put another way, use the right technology tool for the task at hand.

For now I only need a single NUC to be a companion to my other HP, Dell and Lenovo servers as well as MSI ProBox, however maybe there will be a small NUC cluster, grid or ring configured down the road.

What say you, do you have a NUC if so, how is it being used and tips, tricks or hints to share with others?

Ok, nuff said for now.

Cheers
Gs

Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press), The Green and Virtual Data Center (CRC Press) and Resilient Storage Networks (Elsevier)
twitter @storageio

All Comments, (C) and (TM) belong to their owners/posters, Other content (C) Copyright 2006-2023 StorageIO and UnlimitedIO LLC All Rights Reserved

Posted on

Revisiting RAID data protection remains relevant resource links

Revisiting RAID data protection remains relevant and resources

Storage I/O trends

Updated 2/10/2018

RAID data protection remains relevant including erasure codes (EC), local reconstruction codes (LRC) among other technologies. If RAID were really not relevant anymore (e.g. actually dead), why do some people spend so much time trying to convince others that it is dead or to use a different RAID level or enhanced RAID or beyond raid with related advanced approaches?

When you hear RAID, what comes to mind?

A legacy monolithic storage system that supports narrow 4, 5 or 6 drive wide stripe sets or a modern system support dozens of drives in a RAID group with different options?

RAID means many things, likewise there are different implementations (hardware, software, systems, adapters, operating systems) with various functionality, some better than others.

For example, which of the items in the following figure come to mind, or perhaps are new to your RAID vocabulary?

RAID questions

There are Many Variations of RAID Storage some for the enterprise, some for SMB, SOHO or consumer. Some have better performance than others, some have poor performance for example causing extra writes that lead to the perception that all parity based RAID do extra writes (some actually do write gathering and optimization).

Some hardware and software implementations using WBC (write back cache) mirrored or battery backed-BBU along with being able to group writes together in memory (cache) to do full stripe writes. The result can be fewer back-end writes compared to other systems. Hence, not all RAID implementations in either hardware or software are the same. Likewise, just because a RAID definition shows a particular theoretical implementation approach does not mean all vendors have implemented it in that way.

RAID is not a replacement for backup rather part of an overall approach to providing data availability and accessibility.

data protection and durability

What’s the best RAID level? The one that meets YOUR needs

There are different RAID levels and implementations (hardware, software, controller, storage system, operating system, adapter among others) for various environments (enterprise, SME, SMB, SOHO, consumer) supporting primary, secondary, tertiary (backup/data protection, archiving).

RAID comparison
General RAID comparisons

Thus one size or approach does fit all solutions, likewise RAID rules of thumbs or guides need context. Context means that a RAID rule or guide for consumer or SOHO or SMB might be different for enterprise and vise versa, not to mention on the type of storage system, number of drives, drive type and capacity among other factors.

RAID comparison
General basic RAID comparisons

Thus the best RAID level is the one that meets your specific needs in your environment. What is best for one environment and application may be different from what is applicable to your needs.

Key points and RAID considerations include:

· Not all RAID implementations are the same, some are very much alive and evolving while others are in need of a rest or rewrite. So it is not the technology or techniques that are often the problem, rather how it is implemented and then deployed.

· It may not be RAID that is dead, rather the solution that uses it, hence if you think a particular storage system, appliance, product or software is old and dead along with its RAID implementation, then just say that product or vendors solution is dead.

· RAID can be implemented in hardware controllers, adapters or storage systems and appliances as well as via software and those have different features, capabilities or constraints.

· Long or slow drive rebuilds are a reality with larger disk drives and parity-based approaches; however, you have options on how to balance performance, availability, capacity, and economics.

· RAID can be single, dual or multiple parity or mirroring-based.

· Erasure and other coding schemes leverage parity schemes and guess what umbrella parity schemes fall under.

· RAID may not be cool, sexy or a fun topic and technology to talk about, however many trendy tools, solutions and services actually use some form or variation of RAID as part of their basic building blocks. This is an example of using new and old things in new ways to help each other do more without increasing complexity.

·  Even if you are not a fan of RAID and think it is old and dead, at least take a few minutes to learn more about what it is that you do not like to update your dead FUD.

Wait, Isn’t RAID dead?

There is some dead marketing that paints a broad picture that RAID is dead to prop up something new, which in some cases may be a derivative variation of parity RAID.

data dispersal
Data dispersal and durability

RAID rebuild improving
RAID continues to evolve with rapid rebuilds for some systems

Otoh, there are some specific products, technologies, implementations that may be end of life or actually dead. Likewise what might be dead, dying or simply not in vogue are specific RAID implementations or packaging. Certainly there is a lot of buzz around object storage, cloud storage, forward error correction (FEC) and erasure coding including messages of how they cut RAID. Catch is that some object storage solutions are overlayed on top of lower level file systems that do things such as RAID 6, granted they are out of sight, out of mind.

RAID comparison
General RAID parity and erasure code/FEC comparisons

Then there are advanced parity protection schemes which include FEC and erasure codes that while they are not your traditional RAID levels, they have characteristic including chunking or sharding data, spreading it out over multiple devices with multiple parity (or derivatives of parity) protection.

Bottom line is that for some environments, different RAID levels may be more applicable and alive than for others.

Via BizTech – How to Turn Storage Networks into Better Performers

  • Maintain Situational Awareness
  • Design for Performance and Availability
  • Determine Networked Server and Storage Patterns
  • Make Use of Applicable Technologies and Techniques

If RAID is alive, what to do with it?

If you are new to RAID, learn more about the past, present and future keeping mind context. Keeping context in mind means that there are different RAID levels and implementations for various environments. Not all RAID 0, 1, 1/0, 10, 2, 3, 4, 5, 6 or other variations (past, present and emerging) are the same for consumer vs. SOHO vs. SMB vs. SME vs. Enterprise, nor are the usage cases. Some need performance for reads, others for writes, some for high-capacity with low performance using hardware or software. RAID Rules of thumb are ok and useful, however keep them in context to what you are doing as well as using.

What to do next?

Take some time to learn, ask questions including what to use when, where, why and how as well as if an approach or recommendation are applicable to your needs. Check out the following links to read some extra perspectives about RAID and keep in mind, what might apply to enterprise may not be relevant for consumer or SMB and vise versa.

Some advise needed on SSD’s and Raid (Via Spiceworks)
RAID 5 URE Rebuild Means The Sky Is Falling (Via BenchmarkReview)
Double drive failures in a RAID-10 configuration (Via SearchStorage)
Industry Trends and Perspectives: RAID Rebuild Rates (Via StorageIOblog)
RAID, IOPS and IO observations (Via StorageIOBlog)
RAID Relevance Revisited (Via StorageIOBlog)
HDDs Are Still Spinning (Rust Never Sleeps) (Via InfoStor)
When and Where to Use NAND Flash SSD for Virtual Servers (Via TheVirtualizationPractice)
What’s the best way to learn about RAID storage? (Via Spiceworks)
Design considerations for the host local FVP architecture (Via Frank Denneman)
Some basic RAID fundamentals and definitions (Via SearchStorage)
Can RAID extend nand flash SSD life? (Via StorageIOBlog)
I/O Performance Issues and Impacts on Time-Sensitive Applications (Via CMG)
The original RAID white paper (PDF) that while over 20 years old, it provides a basis, foundation and some history by Katz, Gibson, Patterson et al
Storage Interview Series (Via Infortrend)
Different RAID methods (Via RAID Recovery Guide)
A good RAID tutorial (Via TheGeekStuff)
Basics of RAID explained (Via ZDNet)
RAID and IOPs (Via VMware Communities)

Where To Learn More

View additional NAS, NVMe, SSD, NVM, SCM, Data Infrastructure and HDD related topics via the following links.

Additional learning experiences along with common questions (and answers), as well as tips can be found in Software Defined Data Infrastructure Essentials book.

Software Defined Data Infrastructure Essentials Book SDDC

What This All Means

What is my favorite or preferred RAID level?

That depends, for some things its RAID 1, for others RAID 10 yet for others RAID 4, 5, 6 or DP and yet other situations could be a fit for RAID 0 or erasure codes and FEC. Instead of being focused on just one or two RAID levels as the solution for different problems, I prefer to look at the environment (consumer, SOHO, small or large SMB, SME, enterprise), type of usage (primary or secondary or data protection), performance characteristics, reads, writes, type and number of drives among other factors. What might be a fit for one environment would not be a fit for others, thus my preferred RAID level along with where implemented is the one that meets the given situation. However also keep in mind is tying RAID into part of an overall data protection strategy, remember, RAID is not a replacement for backup.

What this all means

Like other technologies that have been declared dead for years or decades, aka the Zombie technologies (e.g. dead yet still alive) RAID continues to be used while the technologies evolves. There are specific products, implementations or even RAID levels that have faded away, or are declining in some environments, yet alive in others. RAID and its variations are still alive, however how it is used or deployed in conjunction with other technologies also is evolving.

Ok, nuff said, for now.

Gs

Greg Schulz – Microsoft MVP Cloud and Data Center Management, VMware vExpert 2010-2017 (vSAN and vCloud). Author of Software Defined Data Infrastructure Essentials (CRC Press), as well as Cloud and Virtual Data Storage Networking (CRC Press), The Green and Virtual Data Center (CRC Press), Resilient Storage Networks (Elsevier) and twitter @storageio. Courteous comments are welcome for consideration. First published on https://storageioblog.com any reproduction in whole, in part, with changes to content, without source attribution under title or without permission is forbidden.

All Comments, (C) and (TM) belong to their owners/posters, Other content (C) Copyright 2006-2024 Server StorageIO and UnlimitedIO. All Rights Reserved. StorageIO is a registered Trade Mark (TM) of Server StorageIO.

Posted on

DIY converged server software defined storage on a budget using Lenovo TS140

Attention DIY Converged Server Storage Bargain Shoppers

Software defined storage on a budget with Lenovo TS140

server storage I/O trends

Recently I put together a two-part series of some server storage I/O items to get a geek for a gift (read part I here and part II here) that also contain items that can be used for accessorizing servers such as the Lenovo ThinkServer TS140.

Image via Lenovo.com

Likewise I have done reviews of the Lenovo ThinkServer TS140 in the past which included me liking them and buying some (read the reviews here and here), along with a review of the larger TD340 here.

Why is this of interest

Do you need or want to do a Do It Yourself (DIY) build of a small server compute cluster, or a software defined storage cluster (e.g. scale-out), or perhaps a converged storage for VMware VSAN, Microsoft SOFS or something else?

Do you need a new server, second or third server, or expand a cluster, create a lab or similar and want the ability to tailor your system without shopping or a motherboard, enclosure, power supply and so forth?

Are you a virtualization or software defined person looking to create a small VMware Virtual SAN (VSAN) needing three or more servers to build a proof of concept or personal lab system?

Then the TS140 could be a fit for you.

storage I/O Lenovo TS140
Image via StorageIOlabs, click to see review

Why the Lenovo TS140 now?

Recently I have seen a lot of site traffic on my site with people viewing my reviews of the Lenovo TS140 of which I have a few. In addition have got questions from people via comments section as well as elsewhere about the TS140 and while shopping at Amazon.com for some other things, noticed that there were some good value deals on different TS140 models.

I tend to buy the TS140 models that are bare bones having power supply, enclosure, CD/DVD, USB ports, power supply and fan, processor and minimal amount of DRAM memory. For processors mine have the Intel E3-1225 v3 which are quad-core and that have various virtualization assist features (e.g. good for VMware and other hypervisors).

What I saw on Amazon the other day (also elsewhere) were some Intel i3-4130 dual core based systems (these do not have all the virtualization features, just the basics) in a bare configuration (e.g. no Hard Disk Drive (HDD), 4GB DRAM, processor, mother board, power supply and fan, LAN port and USB with a price of around $220 USD (your price may vary depending on timing, venue, prime or other membership and other factors). Not bad for a system that you can tailor to your needs. However what also caught my eye were the TS140 models that have the Intel E3-1225 v3 (e.g. quad core, 3.2Ghz) processor matching the others I have with a price of around $330 USD including shipping (your price will vary depending on venue and other factors).

What are some things to be aware of?

Some caveats of this solution approach include:

  • There are probably other similar types of servers, either by price, performance, or similar
  • Compare apples to apples, e.g. same or better processor, memory, OS, PCIe speed and type of slots, LAN ports
  • Not as robust of a solution as those you can find costing tens of thousands of dollars (or more)
  • A DIY system which means you select the other hardware pieces and handle the service and support of them
  • Hardware platform approach where you choose and supply your software of choice
  • For entry-level environments who have floor-space or rack-space to accommodate towers vs. rack-space or other alternatives
  • Software agnostic Based on basically an empty server chassis (with power supplies, motherboard, power supplies, PCIe slots and other things)
  • Possible candidate for smaller SMB (Small Medium Business), ROBO (Remote Office Branch Office), SOHO (Small Office Home Office) or labs that are looking for DIY
  • A starting place and stimulus for thinking about doing different things

What could you do with this building block (e.g. server)

Create a single or multi-server based system for

  • Virtual Server Infrastructure (VSI) including KVM, Microsoft Hyper-V, VMware ESXi, Xen among others
  • Object storage
  • Software Defined Storage including Datacore, Microsoft SOFS, Openstack, Starwind, VMware VSAN, various XFS and ZFS among others
  • Private or hybrid cloud including using Openstack among other software tools
  • Create a hadoop big data analytics cluster or grid
  • Establish a video or media server, use for gaming or a backup (data protection) server
  • Update or expand your lab and test environment
  • General purpose SMB, ROBO or SOHO single or clustered server

VMware VSAN server storageIO example

What you need to know

Like some other servers in this class, you need to pay attention to what it is that you are ordering, check out the various reviews, comments and questions as well as verify the make, model along with configuration. For example what is included and what is not included, warranty, return policy among other things. In the case of some of the TS140 models, they do not have a HDD, OS, keyboard, monitor, mouse along with different types of processors and memory. Not all the processors are the same, pay attention, visit the Intel Ark site to look up a specific processor configuration to see if it fits your needs as well as visit the hardware compatibility list (HCL) for the software that you are planning to use. Note that these should be best practices regardless of make, model, type or vendor for server, storage, I/O networking hardware and software.

What you will need

This list assumes that you have obtained a model without a HDD, keyboard, video, mouse or operating system (OS) installed

  • Update your BIOS if applicable, check the Lenovo site
  • Enable virtualization and other advanced features via your BIOS
  • Software such as an Operating System (OS), hypervisor or other distribution (load via USB or CD/DVD if present)
  • SSD, SSHD/HHDD, HDD or USB flash drive for installing OS or other software
  • Keyboard, video, mouse (or a KVM switch)

What you might want to add (have it your way)

  • Keyboard, video mouse or a KVM switch (See gifts for a geek here)
  • Additional memory
  • Graphics card, GPU or PCIe riser
  • Additional SSD, SSHD/HHDD or HDD for storage
  • Extra storage I/O and networking ports

Extra networking ports

You can easily add some GbE (or faster ports) including use the PCIe x1 slot, or use one of the other slots for a quad port GbE (or faster), not to mention get some InfiniBand single or dual port cards such as the Mellanox Connectx II or Connect III that support QDR and can run in IBA or 10GbE modes. If you only have two or three servers in a cluster, grid, ring configuration you can run point to point topologies using InfiniBand (and some other network interfaces) without using a switch, however you decide if you need or want switched or non-switched (I have a switch). Note that with VMware (and perhaps other hypervisors or OS) you may need to update the drives for the Realtek GbE LAN on Motherboard port (see links below).

Extra storage ports

For extra storage space capacity (and performance) you can easily add PCIe G2 or G3 HBAs (SAS, SATA, FC, FCoE, CNA, UTA, IBA for SRP, etc) or RAID cards among others. Depending on your choice of cards, you can then attach to more internal storage, external storage or some combination with different adapters, cables, interposers and connectivity options. For example I have used TS140s with PCIe Gen 3 12Gbs SAS HBAs attached to 12Gbs SAS SSDs (and HDDs) with the ability to drive performance to see what those devices are capable of doing.

TS140 Hardware Defined My Way

As an example of how a TS140 can be configured, using one of the base E3-1224 v3 models with 4GB RAM, no HDD (e.g around $330 USD, your price will vary), add a 4TB Seagate HDD (or two or three) for around $140 USD each (your price will vary), add a 480GB SATA SSD for around $340 USD (your price will vary) with those attached to the internal SATA ports. To bump up network performance, how about a Mellanox Connectx II dual port QDR IBA/10GbE card for around $140 USD (your price will vary), plus around $65 USD for QSFP cable (you your price will vary), and some extra memory (use what you have or shop around) and you have a platform ready to go for around or under $1,000 USD. Add some more internal or external disks, bump up the memory, put in some extra network adapters and your price will go up a bit, however think about what you can have for a robust not so little system. For you VMware vgeeks, think about the proof of concept VSAN that you can put together, granted you will have to do some DIY items.

Some TS140 resources

Lenovo TS140 resources include

  • TS140 StorageIOlab review (here and here)
  • TS140 Lenovo ordering website
  • TS140 Data and Spec Sheet (PDF here)
  • Lenovo ThinkServer TS140 Manual (PDF here) and (PDF here)
  • Intel E3-1200 v3 processors capabilities (Web page here)
  • Enabling Virtualization Technology (VT) in TS140 BIOS (Press F1) (Read here)
  • Enabling Intel NIC (82579LM) GbE with VMware (Link to user forum and a blog site here)

Image via Lenovo.com

What this all means

Like many servers in its category (price, capabilities, abilities, packaging) you can do a lot of different things with them, as well as hardware define with accessories, or use your own software. Depending on how you end how hardware defining the TS140 with extra memory, HDDs, SSDs, adapters or other accessories and software your cost will vary. However you can also put together a pretty robust system without breaking your budget while meeting different needs.

Is this for everybody? Nope

Is this for more than a lab, experimental, hobbyist, gamer? Sure, with some caveats Is this apples to apples comparison vs. some other solutions including VSANs? Nope, not even close, maybe apples to oranges.

Do I like the TS140? Yup, starting with a review I did about a year ago, I liked it so much I bought one, then another, then some more.

Are these the only servers I have, use or like? Nope, I also have systems from HP and Dell as well as test drive and review others

Why do I like the TS140? It’s a value for some things which means that while affordable (not to be confused with cheap) it has features, salability and ability to be both hardware defined for what I want or need to use them as, along with software define them to be different things. Key for me is the PCIe Gen 3 support with multiple slots (and types of slots), reasonable amount of memory, internal housing for 3.5" and 2.5" drives that can attach to on-board SATA ports, media device (CD/DVD) if needed, or remove to use for more HDDs and SSDs. In other words, it’s a platform that instead of shopping for the motherboard, an enclosure, power supply, processor and related things I get the basics, then configure, and reconfigure as needed.

Another reason I like the TS140 is that I get to have the server basically my way, in that I do not have to order it with a smallest number of HDDs, or that it comes with an OS, more memory than needed or other things that I may or may not be able to use. Granted I need to supply the extra memory, HDDs, SSDs, PCIe adapters and network ports along with software, however for me that’s not too much of an issue.

What don’t I like about the TS140? You can read more about my thoughts on the TS140 in my review here, or its bigger sibling the TD340 here, however I would like to see more memory slots for scaling up. Granted for what these cost, it’s just as easy to scale-out and after all, that’s what a lot of software defined storage prefers these days (e.g. scale-out).

The TS140 is a good platform for many things, granted not for everything, that’s why like storage, networking and other technologies there are different server options for various needs. Exercise caution when doing apples to oranges comparison on price alone, compare what you are getting in terms of processor type (and its functionality), expandable memory, PCIe speed, type and number of slots, LAN connectivity and other features to meet your needs or requirements. Also keep in mind that some systems might be more expensive that include a keyboard, HDD with an OS installed that if you can use those components, then they have value and should be factored into your cost, benefit, return on investment.

And yes, I just added a few more TS140s that join other recent additions to the server storageIO lab resources…

Anybody want to guess what I will be playing with among other things during the up coming holiday season?

Ok, nuff said, for now…

Cheers gs

Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press), The Green and Virtual Data Center (CRC Press) and Resilient Storage Networks (Elsevier)
twitter @storageio

All Comments, (C) and (TM) belong to their owners/posters, Other content (C) Copyright 2006-2024 Server StorageIO and UnlimitedIO LLC All Rights Reserved

Posted on

December 2014 Server StorageIO Newsletter

December 2014

Hello and welcome to this December Server and StorageIO update newsletter.

Seasons Greetings

Seasons greetings

Commentary In The News

StorageIO news

Following are some StorageIO industry trends perspectives comments that have appeared in various venues. Cloud conversations continue to be popular including concerns about privacy, security and availability. Over at BizTech Magazine there are some comments about cloud and ROI. Some comments on AWS and Google SSD services can be viewed at SearchAWS. View other trends comments here

Tips and Articles

View recent as well as past tips and articles here

StorageIOblog posts

Recent StorageIOblog posts include:

View other recent as well as past blog posts here

In This Issue

  • Industry Trends Perspectives
  • Commentary in the news
  • Tips and Articles
  • StorageIOblog posts

    • Events & Activities

    View other recent and upcoming events here

    Webinars

    December 11, 2014 – BrightTalk
    Server & Storage I/O Performance

    December 10, 2014 – BrightTalk
    Server & Storage I/O Decision Making

    December 9, 2014 – BrightTalk
    Virtual Server and Storage Decision Making

    December 3, 2014 – BrightTalk
    Data Protection Modernization

    Videos and Podcasts

    StorageIO podcasts are also available via and at StorageIO.tv

    From StorageIO Labs

    Research, Reviews and Reports

    StarWind Virtual SAN for Microsoft SOFS

    May require registration
    This looks at the shared storage needs of SMB’s and ROBO’s leveraging Microsoft Scale-Out File Server (SOFS). Focus is on Microsoft Windows Server 2012, Server Message Block version (SMB) 3.0, SOFS and StarWind Virtual SAN management software

    View additional reports and lab reviews here.

    Resources and Links

    Check out these useful links and pages:
    storageio.com/links
    objectstoragecenter.com
    storageioblog.com/data-protection-diaries-main/
    storageio.com/ssd
    storageio.com/ssd

    Enjoy this edition of the Server and StorageIO update newsletter and watch for new tips, articles, StorageIO lab report reviews, blog posts, videos and podcasts along with in the news commentary appearing soon.

    Seasons greetings 2014

    Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press), The Green and Virtual Data Center (CRC Press) and Resilient Storage Networks (Elsevier)
    twitter @storageio

    All Comments, (C) and (TM) belong to their owners/posters, Other content (C) Copyright 2006-2024 Server StorageIO and UnlimitedIO LLC All Rights Reserved

    Posted on

    Server Storage I/O Cables Connectors Chargers & other Geek Gifts

    Server Storage I/O Cables Connectors Chargers & other Geek Gifts

    server storage I/O trends

    This is part one of a two part series for what to get a geek for a gift, read part two here.

    It is that time of the year when annual predictions are made for the upcoming year, including those that will be repeated next year or that were also made last year.

    It’s also the time of the year to get various projects wrapped up, line up new activities, get the book-keeping things ready for year-end processing and taxes, as well as other things.

    It’s also that time of the year to do some budget and project planning including upgrades, replacements, enhancements while balancing an over-subscribed holiday party schedule some of you may have.

    Lets not forget getting ready for vacations, perhaps time off from work with some time upgrading your home lab or other projects.

    Then there are the gift lists or trying to figure out what to get that difficult to shop for person particular geek’s who may have everything, or want the latest and greatest that others have, or something their peers don’t have yet.

    Sure I have a DJI Phantom II on my wish list, however also have other things on my needs list (e.g. what I really need and want vs. what would be fun to wish for).

    DJI Phantom helicopter drone
    Image via DJI.com, click on image to learn more and compare models

    So here are some things for the geek or may have everything or is up on having the latest and greatest, yet forgot or didn’t know about some of these things.

    Not to mention some of these might seem really simple and low-cost, think of them like a Lego block or erector set part where your imagination will be your boundary how to use them. Also, most if not all of these are budget friendly particular if you shop around.

    Replace a CD/DVD with 4 x 2.5″ HDD’s or SSD’s

    So you need to add some 2.5" SAS or SATA HDD’s, SSD’s, HHDD’s/SSHD’s to your server for supporting your VMware ESXi, Microsoft Hyper-V, KVM, Xen, OpenStack, Hadoop or legacy *nix or Windows environment or perhaps gaming system. Challenge is that you are out of disk drive bay slots and you want things neatly organized vs. a rat’s nest of cables hanging out of your system. No worries assuming your server has an empty media bay (e.g. those 5.25" slots where CDs/DVDs or really old HDD’s go), or if you can give up the CD/DVD, then use that bay and its power connector to add ones of these. This is a 4 x 2.5" SAS and SATA drive bay that has a common power connector (molex male) with each drive bay having its own SATA drive connection. By each drive having its own SATA connection you can map the drives to an on-board available SATA port attached to a SAS or SATA controller, or attach an available port on a RAID adapter to the ports using a cable such as small form factor (SFF) 8087 to SATA.

    sas storage enclosuresas sata storage enclosure
    (Left) Rear view with Molex power and SATA cables (Right) front view

    I have a few of these in different systems and what I like about them is that they support different drive speeds, plus they will accept a SAS drive where many enclosures in this category only support SATA. Once you mount your 2.5" HDD or SSD using screws, you can hot swap (requires controller and OS support) the drives and move them between other similar enclosures as needed. The other thing I like is that there are front indicator lights as well as by each drive having its own separate connection, you can attach some of the drives to a RAID adapter while others connected to on-board SATA ports. Oh, and you can also have different speeds of drives as well.

    Power connections

    Depending on the type of your server, you may have Molex, SATA or some other type of power connections. You can use different power connection cables to go from one type (Molex) to another, create a connection for two devices, create an extension to reach hard to get to mounting locations.

    Warning and disclosure note, keep in mind how much power you are drawing when attaching devices to not cause an electrical or fire hazard, follow manufactures instructions and specification doing so at your own risk! After all, Just like Clark Grizzwald in National Lampoon Christmas Vacation who found you could attach extension cord to splitters to splitters and fan-out to have many lights attached, you don’t want to cause a fire or blackout when you plug to many drives in.


    National Lampoon Christmas Vacation

    Measuring Power

    Ok so you do not want to do a Clark Grizzwald (see above video) and overload a power circuit, or perhaps you simply want to know how many watts, amps or quality of your voltage is.

    There are many types of power meters along with various prices, some even have interfaces where you can grab event data to correlate with server storage I/O networking performance to do things such as IOP’s per watt among other metrics. Speaking of IOP’s per watt, check out the SNIA Emerald site where they have some good tools including a benchmark script that uses Vdbench to drive hot band workload (e.g. basically kick the crap out of a storage system).

    Back to power meters, I like the Kill A Watt series of meters as they give good info about amps, volts, power quality. I have these plugged into outlets so I can see how much power is being used by the battery backup units (BBU) aka UPS that also serve as power surge filters. If needed I can move these further downstream to watch the power intake of a specific server, storage, network or other device.

    Kill A Watt Power meter

    Standby and backup power

    Electrical power surge strips should be a given or considered common sense, however what is or should be common sense should be repeated so that it remains common sense, you should be using power surge strips or other devices.

    Standby, UPS and BBU

    For most situations a good surge suppressor will cover short power transients.

    APC power strips and battery backup
    Image via APC and model similar to those that I have

    For slightly longer power outages of a few seconds to minutes, that’s where battery backup up (BBU) units that also have surge suppression comes into play. There are many types, sizes with various features to meet your needs and budget. I have several of theses in a couple of different sizes not only for servers, storage and networking equipment (including some WiFi access points, routers, etc), I also have them for home things such as satellite DVR’s. However not everything needs to stay on while others simply need to stay on long-enough in order to shutdown manually or via automated power off sequences.

    Alternate Power Generation

    Generators are not just for the rich and famous or large data center, like other technologies they are available in different sizes, power capacity, fuel sources, manual or automated among other things.

    kohler residential generator
    Image via Kohler Power similar to model that I have

    Note that even with a typical generator there will be a time gap from the time power goes off until the generator starts, stabilizes and you have good power. That’s where the BBU and UPS mentioned above comes into play to bridge those time gaps which in my cases is about 25-30 seconds. Btw, knowing how much power your technology is drawing using tools such as the Kill A Watt is part of the planning process to avoid surprises.

    What about Solar Power

    Yup, whether it is to fit in and be green, or simply to get some electrical power when or where it is not needed to charge a battery or power some device, these small solar power devices are very handy.

    solar charger
    Image via Amazon.com
    solar battery charger
    Image via Amazon.com

    For example you can get or easily make an adapter to charge laptops, cell phones or even power them for normal use (check manufactures information on power usage, Amps and Voltage draws among other warnings to prevent fire and other things). Btw, not only are these handy for computer related things, they also work great for keeping batteries on my fishing boat charged so that I have my fish finder and other electronics, just saying.

    Fire suppression

    How about a new or updated smoke and fire detection alarm monitor, as well as fire extinguisher for the geek’s software defined hardware that runs on power (electrical or battery)?

    The following is from the site Fire Extinguisher 101 where you can learn more about different types of suppression technologies.

    Image via Fire Extinguisher 101
    • Class A extinguishers are for ordinary combustible materials such as paper, wood, cardboard, and most plastics. The numerical rating on these types of extinguishers indicates the amount of water it holds and the amount of fire it can extinguish. Geometric symbol (green triangle)
    • Class B fires involve flammable or combustible liquids such as gasoline, kerosene, grease and oil. The numerical rating for class B extinguishers indicates the approximate number of square feet of fire it can extinguish. Geometric symbol (red square)
    • Class C fires involve electrical equipment, such as appliances, wiring, circuit breakers and outlets. Never use water to extinguish class C fires – the risk of electrical shock is far too great! Class C extinguishers do not have a numerical rating. The C classification means the extinguishing agent is non-conductive. Geometric symbol (blue circle)
    • Class D fire extinguishers are commonly found in a chemical laboratory. They are for fires that involve combustible metals, such as magnesium, titanium, potassium and sodium. These types of extinguishers also have no numerical rating, nor are they given a multi-purpose rating – they are designed for class D fires only. Geometric symbol (Yellow Decagon)
    • Class K fire extinguishers are for fires that involve cooking oils, trans-fats, or fats in cooking appliances and are typically found in restaurant and cafeteria kitchens. Geometric symbol (black hexagon)

    Wrap up for part I

    This wraps up part I of what to get a geek V2014, continue reading part II here.

    Ok, nuff said, for now…

    Cheers gs

    Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press), The Green and Virtual Data Center (CRC Press) and Resilient Storage Networks (Elsevier)
    twitter @storageio

    All Comments, (C) and (TM) belong to their owners/posters, Other content (C) Copyright 2006-2024 Server StorageIO and UnlimitedIO LLC All Rights Reserved

    Posted on

    Part II 2014 Server Storage I/O Geek Gift ideas

    Part II 2014 Server Storage I/O Geek Gift ideas

    server storage I/O trends

    This is part two of a two part series for what to get a geek for a gift, read part one here.

    KVM switch

    Not to be confused with a software defined network (SDN) switch for the KVM virtualization hypervisor, how about the other KVM switch?

    kvm switch
    My KVM switch in use, looks like five servers are powered on.

    If you have several servers or devices that need a Keyboard Video Mouse connection, or are using A/B box or other devices, why not combine using a KVM switch. I bought the Startech shown above from Amazon which works out to be under $40 a port (connection) meaning I do not have to have Keyboards, Video monitors or Mouse for each of those systems.

    With my KVM shown above, I have used the easy setup to name each of the ports via the management software so that when a button is pressed, not only does the applicable screen appear, also a graphic text message overlay tell me which server is being displayed. This is handy for example as I have some servers that are identical (e.g. Lenovo TS140s) running VMware that a quick glance can help me verify I’m on the right one (e.g. without looking at the VMware host name or IP). This feature is also handy during power on self test (POST) when the servers physical or logical (e.g. VMware, Windows, Hyper-V, Ubuntu, Openstack, etc..) identity is known. Another thing I like about these is that on the KVM switch there is a single VGA type connector, while on the server end there is a VGA connector for attaching to the monitor port of the device, and a break out cable with USB for attaching to server to get Keyboard and Mouse.

    Single drive shoe box

    Usually things are in larger server or storage systems enclosures, however now and then there is the need to supply power to a HDD or SSD along with a USB or eSATA interface for attaching to a system. These are handy and versatile little aluminum enclosures.

    single drive sata enclosuredisk enclosure

    Note that you can now also find these types of cables that can do same or similar function for in side a server connection (check out this cable among others at Amazon)

    USB-SATA cable

    It would be easy to assume that everybody would have these by now particular since everybody (depending on who you listen to or what you read) has probably converted from a HDD to SSD. However for those who have not done an HDD to SSD, or simply a HDD to newer HDD conversion, or that have an older HDD (or SSD) lying around, these cables come in very handy. attach one end (e.g. the SATA end) to a HDD or SSD and the other to a USB port on a laptop, tablet or server. Caveat however with these is that they generally only have power (via USB) for a 2.5″ type drive so for a larger more power-hungry 3.5″ device, you would need a different powered cable, or small shoe box type enclosure.

    eSATA cable
    (Left) USB to SATA and (Right) eSATA to SATA cables

    Mophie USB charger

    There are many different types of mobile device chargers available along with multi-purpose cables. I like the Mophie which I received at an event from NetApp (Thanks NetApp) and the flexible connector I received from Dyn while at AWS re:Invent 2014 (Thanks Dyn, I’m also a Dyn customer fwiw).
    power chargerpower cable
    (Left) Mophie Power station and (Right) multi-connector cable

    The Mohpie has USB connector so that you can charge it via a charging station or via a computer, as well as attach a USB to Apple or other device connector. There is also a small connector for attach to other devices. This is where the dandy Dyn device comes into play as it has a USB as well as Apple and many other common connectors as shown in the figure below. Google around and I’m sure you can find both for sale, or as giveaways or something similar.

    SAS SATA Interposer

    sas interposerserver storage power
    (Left) SAS to SATA interposer (Right) Molex power with SATA connector to SAS

    Note that the above are intended for passing a SAS signal from a device such as HDD or SSD to a SAS based controller that happens to have SATA mechanical or keyed interfaces such as with some servers. This means that the real controller needs to be SAS and the attached drives can be SATA or SAS keeping in mind that a SATA device can plug into a SAS controller however not vise versa. You can find the above at Amazon among other venues. Need a dual-lane SAS connector as an alternative to the one shown above on the right, then check this one out at Amazon.

    Need to learn more about the many different facets of SAS and related technologies including how it coexists with iSCSI, Fibre Channel (FC), FCoE, InfiniBand and other interfaces, how about getting a free copy of SAS SANs for Dummies?

    SAS SANS for dummies

    There are also these for doing board level connections

    esata connectorsata to esata cablesata male to male gender changer
    Some additional SAS and SATA drive connectors

    In the above on the left are a female to female SATA cable with a male to male SATA gender changer attached to be used for example between a storage device and the SATA connector port on a servers motherboard, HBA or RAID controller. In the middle are shown some SATA female to female cables, as well as a SATA to eSATA (external SATA) cable (middle), and on the right are some SATA Male to SATA Male gender changes also shown being used on the left in the above figures.

    Internal Power cable / connectors

    If you or your geek are doing things in the lab or other environment adding and reconfiguring devices such as some of those mentioned above (or below), sooner or later there will be the need to do something with power cables and connectors.

    power meter
    Various cables, adapters and extender

    In the above figure are shown (top to bottom) a SATA male to molex, SATA female to SATA male and to its right SATA female to Molex. Below that are two SATA females to Molex, below that is a SATA male to dual Molex and on the bottom is a single SATA to dual SATA. Needless to say there are many other combinations of connectors as well as different genders (e.g. Male or Female) along with extenders. As mentioned above, pay attention to manufacturers recommend power draw and safety notices to prevent accidental electric shock or fire.

    Intel Edison kit for IoT and IoD

    Are you or your geek into the Internet of Things (IoT) or Internet of Devices (IoD) or other similar things and gadgets? Have you heard about Intel’s Edison breakout board for doing software development and attachment of various hardware things? Looking for something to move beyond a Raspberry Pi system?

    Intel Edison boardIntel Edison kits
    Images via Intel.com

    Over the hills, through the woods WiFi

    This past year I found Nanostation extended WiFi devices that solved a challenge (problem) which was how to get a secure WiFi signal up to a couple hundred yards through a thick forest between some hill’s.


    Image via UBNT.com, check out their other models as well as resources for different deployments

    The problem was it was to far and too many tree’s with leaves use a regular WiFi connection and too far to run cable if I did not need to. I found the solution by getting a pair of the Nanostation M2 putting them into bridge mode, then doing some alignment with their narrow beam antennas to bounce a signal through the woods. For those who simply need to go a long distance, these devices can be reconfigured to go several km’s line of sight. Click on the image above to see other models of the Nanostation as well as links to various resources on how they can be used for other things or deployments.

    How about some software

    • UpDraft Backup – This is a WordPress blog plugin that I use to back up my entire web including the templates, plug-ins, MySQL database and all other related components. While my dedicated private server gets backed up by my service provider (Bluehost), I wanted an extra detail of protection along with a copy placed at a different place (e.g. at my AWS account). Updraft is an example of an emerging class of tools for backing up and protecting cloud based and cloud born data. For example EMC recently acquired cloud backup startup Spanning who has the ability of protecting Salesforce, Google and other cloud based data.
    • Visual ESXtop – This is a great free tool that provides a nice interface and remote access for doing ESXtop functions normally accomplished from the ESXi console.
    • Microsoft Diskspd – If you or your geek is into server storage I/O performance and benchmark that has a Windows environment and looking for something besides Iometer, have them download the Microsoft Diskspd free utility.
    • Futuremark PCmark – Speaking of server storage I/O performance, check out Futuremark PCmark which will give your computer a great workout from graphics and video to compute, storage I/O and other common tasks.
    • RV Tools – Need to know more about your VMware virtual environment, take a quick inventory or something else, then your geek should have a copy of RV Tools from Robware.
    • iVMControl – For that vgeek how wants to be able to do simple VMware tasks from an iPhone, check out iVMControl tools. Its great, I don’t use it a lot, however there are times where I don’t need to or want to use a tablet or PC to reach my VMware environment, that’s when this virtual gadget comes into play.

    Livescribe Digital Pen and Paper

    How about a Livescribe digital pen and paper? Sure you can use a PC, Apple or other tablet, however some things are still easier done on a traditional paper and virtual pen. I got one of these about a year ago and use it for note taking, mocking up slides for presentations and in some cases have used this for creating figures and other things. It would be easy to see and place the Livescribe and a Windows or other tablet as an either or competitive however for me, I still see where they are better together addressing different things, at least for now.

    livescribe digital penlivescribe digital pen

    (Left) using my Livescribe and Echo digital pen (Right) resulting exported .Png

    Tip: I you noticed in the above left image (e.g. the original) the lines in the top figure, compared to the lines in the figure on the right are different. If you encounter your livescribe causing lines to run on or into each other it is because your digital pen tip is sticking. It’s easy to check by looking at the tip of your digital pen and see if the small red light is on or off, or if it stays on when you press the pen tip. If it stays on, reset the pen tip. Also when you write, make sure to lift up on the pen tip so that it releases, otherwise you will get results like those shown on the right.

    livescribe digital penlivescribe digital pen
    (Left) Livescribe Digital Desktop (Middle) Imported Digital Document (Right) Exported PNG

    Also check out this optional application that turns a Livescribe Echo pen like mine into a digital tablet allowing you to draw on-screen with certain applications and webinar tools.

    Some books for the geek

    Speaking of reading, for those who are not up on the No SQL and alternative SQL based databases including Mongo, Hbase, Riak, Cassandra, MySQL, add Seven Databases in Seven Weeks to your liust. Click on the image to read my book review of it as well as links to order it from Amazon. Seven Databases in Seven Weeks (A Guide to Modern Databases and the NoSQL Movement) is a book written Eric Redmond (@coderoshi) and Jim Wilson (@hexlib), part of The Pragmatic Programmers (@pragprog) series that takes a look at several non SQL based database systems.

    seven database nosql

    Where to get the above items

    • Ebay for new and used
    • Amazon for new and used
    • Newegg
    • PC Pit stop
    • And many other venues

    What this all means

    Note: Some of the above can be found at your favorite trade show or conference so keep that in mind for future gift giving.

    What interesting geek gift ideas or wish list items do you have?

    Of course if you have anything interesting to mention feel free to add it to the comments (keep it clean though ;) or feel free to send to me for future mention.

    In the meantime have a safe and happy holiday season for what ever holiday you enjoy celebrating anytime of the year.

    Ok, nuff said, for now…

    Cheers gs

    Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press), The Green and Virtual Data Center (CRC Press) and Resilient Storage Networks (Elsevier)
    twitter @storageio

    All Comments, (C) and (TM) belong to their owners/posters, Other content (C) Copyright 2006-2024 Server StorageIO and UnlimitedIO LLC All Rights Reserved

    Posted on

    Cloud Conversations: Revisiting re:Invent 2014 and other AWS updates

    server storage I/O trends

    This is part one of a two-part series about Amazon Web Services (AWS) re:Invent 2014 and other recent cloud updates, read part two here.

    Revisiting re:Invent 2014 and other AWS updates

    AWS re:Invent 2014

    A few weeks ago I attended Amazon Web Service (AWS) re:Invent 2014 in Las Vegas for a few days. For those of you who have not yet attended this event, I recommend adding it to your agenda. If you have interest in compute servers, networking, storage, development tools or management of cloud (public, private, hybrid), virtualization and related topic themes, you should check out AWS re:invent.

    AWS made several announcements at re:invent including many around development tools, compute and data storage services. One of those to keep an eye on is cloud based Aurora relational database service that complement existing RDS tools. Aurora is positioned as an alternative to traditional SQL based transactional databases commonly found in enterprise environments (e.g. SQL Server among others).

    Some recent AWS announcements prior to re:Invent include

    AWS vCenter Portal

    Using the AWS Management Portal for vCenter adds a plug-in within your VMware vCenter to manage your AWS infrastructure. The vCenter for AWS plug-in includes support for AWS EC2 and Virtual Machine (VM) import to migrate your VMware VMs to AWS EC2, create VPC (Virtual Private Clouds) along with subnet’s. There is no cost for the plug-in, you simply pay for the underlying AWS resources consumed (e.g. EC2, EBS, S3). Learn more about AWS Management Portal for vCenter here, and download the OVA plug-in for vCenter here.

    AWS re:invent content


    AWS Andy Jassy (Image via AWS)

    November 12, 2014 (Day 1) Keynote (highlight video, full keynote). This is the session where AWS SVP Andy Jassy made several announcements including Aurora relational database that complements existing RDS (Relational Data Services). In addition to Andy, the key-note sessions also included various special guests ranging from AWS customers, partners and internal people in support of the various initiatives and announcements.


    Amazon.com CTO Werner Vogels (Image via AWS)

    November 13, 2014 (Day 2) Keynote (highlight video, full keynote). In this session, Amazon.com CTO Werner Vogels appears making announcements about the new Container and Lambda services.

    AWS re:Invent announcements

    Announcements and enhancements made by AWS during re:Invent include:

    • Key Management Service (KMS)
    • Amazon RDS for Aurora
    • Amazon EC2 Container Service
    • AWS Lambda
    • Amazon EBS Enhancements
    • Application development, deployed and life-cycle management tools
    • AWS Service Catalog
    • AWS CodeDeploy
    • AWS CodeCommit
    • AWS CodePipeline

    Key Management Service (KMS)

    Hardware security module (HSM) based key managed service for creating and control of encryption keys to protect security of digital assets and their keys. Integration with AWS EBS and others services including S3 and Redshift along with CloudTrail logs for regulatory, compliance and management. Learn more about AWS KMS here

    AWS Database

    For those who are not familiar, AWS has a suite of database related services including SQL and no SQL based, simple to transactional to Petabyte (PB) scale data warehouses for big data and analytics. AWS offers the Relational Database Service (RDS) which is a suite of different database types, instances and services. RDS instance and types include SimpleDB, MySQL, Postgress, Oracle, SQL Server and the new AWS Aurora offering (read more below).  Other little data database and big data repository related offerings include DynamoDB (a non-SQL database), ElasticCache (in memory cache repository) and Redshift (large-scale data warehouse and big data repository).

    In addition to database services offered by AWS, you can also combine various AWS resources including EC2 compute, EBS and other storage offerings to create your own solution. For example there are various Amazon Machine Images (AMI’s) or pre-built operating systems and database tools available with EC2 as well as via the AWS Marketplace , such as MongoDB and Couchbase among others. For those not familiar with MongoDB, Couchbase, Cassandra, Riak along with other non SQL or alternative databases and key value repositories, check out Seven Databases in Seven Weeks in my book review of it here.

    Seven Databases book review
    Seven Databases in Seven Weeks and NoSQL movement available from Amazon.com

    Amazon RDS for Aurora

    Aurora is a new relational database offering part of the AWS RDS suite of services. Positioned as an alternative to commercial high-end database, Aurora is a cost-effective database engine compatible with MySQL. AWS is claiming 5x better performance than standard MySQL with Aurora while being resilient and durable. Learn more about Aurora which will be available in early 2015 and its current preview here.

    Amazon EC2 C4 instances

    AWS will be adding a new C4 instance as a next generation of EC2 compute instance based on Intel Xeon E5-2666 v3 (Haswell) processors. The Intel Xeon E5-2666 v3 processors run at a clock speed of 2.9 GHz providing the highest level of EC2 performance. AWS is targeting traditional High Performance Computing (HPC) along with other compute intensive workloads including analytics, gaming, and transcoding among others. Learn more AWS EC2 instances here, and view this Server and StorageIO EC2, EBS and associated AWS primer here.

    Amazon EC2 Container Service

    Containers such as those via Docker have become popular to support developers rapidly build as well as deploy scalable applications. AWS has added a new feature called EC2 Container Service that supports Docker using simple API’s. In addition to supporting Docker, EC2 Container Service is a high performance scalable container management service for distributed applications deployed on a cluster of EC2 instances. Similar to other EC2 services, EC2 Container Service leverages security groups, EBS volumes and Identity Access Management (IAM) roles along with scheduling placement of containers to meet your needs. Note that AWS is not alone in adding container and docker support with Microsoft Azure also having recently made some announcements, learn more about Azure and Docker here. Learn more about EC2 container service here and more about Docker here.

    Docker for smarties

    Continue reading about re:Invent 2014 and other recent AWS enhancements here in part two of this two-part series.

    Ok, nuff said (for now)

    Cheers gs

    Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press), The Green and Virtual Data Center (CRC Press) and Resilient Storage Networks (Elsevier)
    twitter @storageio

    All Comments, (C) and (TM) belong to their owners/posters, Other content (C) Copyright 2006-2024 Server StorageIO and UnlimitedIO LLC All Rights Reserved

    Posted on

    Part II: Revisiting re:Invent 2014, Lambda and other AWS updates

    server storage I/O trends

    Part II: Revisiting re:Invent 2014 and other AWS updates

    This is part two of a two-part series about Amazon Web Services (AWS) re:Invent 2014 and other recent cloud updates, read part one here.

    AWS re:Invent 2014

    AWS re:Invent announcements

    Announcements and enhancements made by AWS during re:Invent include:

    • Key Management Service (KMS)
    • Amazon RDS for Aurora
    • Amazon EC2 Container Service
    • AWS Lambda
    • Amazon EBS Enhancements
    • Application development, deployed and life-cycle management tools
    • AWS Service Catalog
    • AWS CodeDeploy
    • AWS CodeCommit
    • AWS CodePipeline

    AWS Lambda

    In addition to announcing new higher performance Elastic Cloud Compute (EC2) compute instances along with container service, another new service is AWS Lambda. Lambda is a service that automatically and quickly runs your applications code in response to events, activities, or other triggers. In addition to running your code, Lambda service is billed in 100 millisecond increments along with corresponding memory use vs. standard EC2 per hour billing. What this means is that instead of paying for an hour of time for your code to run, you can choose to use the Lambda service with more fine-grained consumption billing.

    Lambda service can be used to have your code functions staged ready to execute. AWS Lambda can run your code in response to S3 bucket content (e.g. objects) changes, messages arriving via Kinesis streams or table updates in databases. Some examples include responding to event such as a web-site click, response to data upload (photo, image, audio, file or other object), index, stream or analyze data, receive output from a connected device (think Internet of Things IoT or Internet of Device IoD), trigger from an in-app event among others. The basic idea with Lambda is to be able to pay for only the amount of time needed to do a particular function without having to have an AWS EC2 instance dedicated to your application. Initially Lambda supports Node.js (JavaScript) based code that runs in its own isolated environment.

    AWS cloud example
    Various application code deployment models

    Lambda service is a pay for what you consume, charges are based on the number of requests for your code function (e.g. application), amount of memory and execution time. There is a free tier for Lambda that includes 1 million requests and 400,000 GByte seconds of time per month. A GByte second is the amount of memory (e.g. DRAM vs. storage) consumed during a second. An example is your application is run 100,000 times and runs for 1 second consuming 128MB of memory = 128,000,000MB = 128,000GB seconds. View various pricing models here on the AWS Lambda site that show examples for different memory sizes, times a function runs and run time.

    How much memory you select for your application code determines how it can run in the AWS free tier, which is available to both existing and new customers. Lambda fees are based on the total across all of your functions starting with the code when it runs. Note that you could have from one to thousands or more different functions running in Lambda service. As of this time, AWS is showing Lambda pricing as free for the first 1 million requests, and beyond that, $0.20 per 1 million request ($0.0000002 per request) per duration. Duration is from when you code runs until it ends or otherwise terminates rounded up to the nearest 100ms. The Lambda price also depends on the amount of memory you allocated for your code. Once past the 400,000 GByte second per month free tier the fee is $0.00001667 for every GB second used.

    Why use AWS Lambda vs. an EC2 instance

    Why would you use AWS Lambda vs. provisioning an Container, EC2 instance or running your application code function on a traditional or virtual machine?

    If you need control and can leverage an entire physical server with its operating system (O.S.), application and support tools for your piece of code (e.g. JavaScript), that could be an option. If you simply need to have an isolated image instance (O.S., applications and tools) for your code on a shared virtual on-premises environment then that can be an option. Likewise if you have the need to move your application to an isolated cloud machine (CM) that hosts an O.S. along with your application paying for those resources such as on an hourly basis, that could be your option. Simply need a lighter-weight container to drop your application into that’s where Docker and containers comes into play to off-load some of the traditional application dependencies overhead.

    However, if all you want to do is to add some code logic to support processing activity for example when an object, file or image is uploaded to AWS S3 without having to standup an EC2 instance along with associated server, O.S. and complete application activity, that’s where AWS Lambda comes into play. Simply create your code (initially JavaScript) and specify how much memory it needs, define what events or activities will trigger or invoke the event, and you have a solution.

    View AWS Lambda pricing along with free tier information here.

    Amazon EBS Enhancements

    AWS is increasing the performance and size of General Purpose SSD and Provisioned IOP’s SSD volumes. This means that you can create volumes up to 16TB and 10,000 IOP’s for AWS EBS general-purpose SSD volumes. For EBS Provisioned IOP’s SSD volumes you can create up to 16TB for 20,000 IOP’s. General-purpose SSD volumes deliver a maximum throughput (bandwidth) of 160 MBps and Provisioned IOP SSD volumes have been specified by AWS at 320MBps when attached to EBS optimized instances. Learn more about EBS capabilities here. Verify your IO size and verify AWS sizing information to avoid surprises as all IO sizes are not considered to be the same. Learn more about Provisioned IOP’s, optimized instances, EBS and EC2 fundamentals in this StorageIO AWS primer here.

    Application development, deployed and life-cycle management tools

    In addition to compute and storage resource enhancements, AWS has also announced several tools to support application development, configuration along with deployment (life-cycle management). These include tools that AWS uses themselves as part of building and maintaining the AWS platform services.

    AWS Config (Preview e.g. early access prior to full release)

    Management, reporting and monitoring capabilities including Data center infrastructure management (DCIM) for monitoring your AWS resources, configuration (including history), governance, change management and notifications. AWS Config enables similar capabilities to support DCIM, Change Management Database (CMDB), trouble shooting and diagnostics, auditing, resource and configuration analysis among other activities. Learn more about AWS Config here.

    AWS Service Catalog

    AWS announced a new service catalog that will be available in early 2015. This new service capability will enable administrators to create and manage catalogs of approved resources for users to use via their personalized portal. Learn more about AWS service catalog here.

    AWS CodeDeploy

    To support code rapid deployment automation for EC2 instances, AWS has released CodeDeploy. CodeDeploy masks complexity associated with deployment when adding new features to your applications while reducing human error-prone operations. As part of the announcement, AWS mentioned that they are using CodeDeploy as part of their own applications development, maintenance, and change-management and deployment operations. While suited for at scale deployments across many instances, CodeDeploy works with as small as a single EC2 instance. Learn more about AWS CodeDeploy here.

    AWS CodeCommit

    For application code management, AWS will be making available in early 2015 a new service called CodeCommit. CodeCommit is a highly scalable secure source control service that host private Git repositories. Supporting standard functionalities of Git, including collaboration, you can store things from source code to binaries while working with your existing tools. Learn more about AWS CodeCommit here.

    AWS CodePipeline

    To support application delivery and release automation along with associated management tools, AWS is making available CodePipeline. CodePipeline is a tool (service) that supports build, checking workflow’s, code staging, testing and release to production including support for 3rd party tool integration. CodePipeline will be available in early 2015, learn more here.

    Additional reading and related items

    Learn more about the above and other AWS services by actually truing hands on using their free tier (AWS Free Tier). View AWS re:Invent produced breakout session videos here, audio podcasts here, and session slides here (all sessions may not yet be uploaded by AWS re:Invent)

    What this all means

    AWS amazon web services

    AWS continues to invest as well as re-invest into its environment both adding new feature functionality, as well as expanding the extensibility of those features. This means that AWS like other vendors or service providers adds new check-box features, however they also like some increase the depth extensibility of those capabilities. Besides adding new features and increasing the extensibility of existing capabilities, AWS is addressing both the data and information infrastructure including compute (server), storage and database, networking along with associated management tools while also adding extra developer tools. Developer tools include life-cycle management supporting code creation, testing, tracking, testing, change management among other management activities.

    Another observation is that while AWS continues to promote the public cloud such as those services they offer as the present and future, they are also talking hybrid cloud. Granted you have to listen carefully as you may not simply hear hybrid cloud used like some toss it around, however listen for and look into AWS Virtual Private Cloud (VPC), along with what you can do using various technologies via the AWS marketplace. AWS is also speaking the language of enterprise and traditional IT from an applications and development to data and information infrastructure perspective while also walking the cloud talk. What this means is that AWS realizes that they need to help existing environments evolve and make the transition to the cloud which means speaking their language vs. converting them to cloud conversations to then be able to migrate them to the cloud. These steps should make AWS practical for many enterprise environments looking to make the transition to public and hybrid cloud at their pace, some faster than others. More on these and some related themes in future posts.

    The AWS re:Invent event continues to grow year over year, I heard a figure of over 12,000 people however it was not clear if that included exhibiting vendors, AWS people, attendees, analyst, bloggers and media among others. However a simple validation is that the keynotes were in the larger rooms used by events such as EMCworld and VMworld when they hosted in Las Vegas as was the expo space vs. what I saw last year while at re:Invent. Unlike some large events such as VMworld where at best there is a waiting queue or line to get into sessions or hands on lab (HOL), while becoming more crowded, AWS re:Invent is still easy to get in and spend some time using the HOL which is of course powered by AWS meaning you can resume what you started while at re:Invent later. Overall a good event and nice series of enhancements by AWS, looking forward to next years AWS re:Invent.

    Ok, nuff said (for now)

    Cheers gs

    Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press), The Green and Virtual Data Center (CRC Press) and Resilient Storage Networks (Elsevier)
    twitter @storageio

    All Comments, (C) and (TM) belong to their owners/posters, Other content (C) Copyright 2006-2024 Server StorageIO and UnlimitedIO LLC All Rights Reserved

    Posted on

    November 2014 Server StorageIO Update Newsletter

    November 2014

    Hello and welcome to this November Server and StorageIO update newsletter. Enjoy this edition of the Server and StorageIO update newsletter and watch for new tips, articles, StorageIO lab report reviews, blog posts, videos and podcasts along with in the news commentary appearing soon.

    Cheers gs

    Industry Trends and Perspectives

    Storage trends

    A few weeks ago I attended AWS re:invent 2014 in Las Vegas for a few days. For those of you who have not yet attended this event, I recommend adding it to your agenda. If you have interest in compute servers, networking, storage, development tools or management of cloud (public, private, hybrid), virtualization and related topic themes, you should check out AWS re:invent. For those who need a AWS primer or refresher visit here.

    AWS made several announcements at re:invent including many around development tools, compute and data storage services. One of those to keep an eye on is cloud based Aurora relational database service that complement existing RDS tools. Aurora is positioned as an alternative to traditional SQL based transactional databases commonly found in enterprise environments (e.g. SQL Server, IBM DB2/UDB, Oracle among others). I will put some additional notes and perspectives together in a StorageIOblog post along with some video from AWS soon.

    Commentary In The News

    StorageIO news

    Following are some StorageIO industry trends perspectives comments that have appeared in various venues. Cloud conversations continue to be popular including concerns about privacy, security and availability.

    Over at Processor: Comments on Datacenters, Decide Whether To Build Or Not To Build, and controlling storage costs via insight and action. EdTechMagazine: has some comments on IaaS and Is Lean IT Here to Stay, while at CyberTrend perspectives on Better Servers for Better Business.

    Across the pond over at the UK based Computerweekly comments on AWS launching Aurora cloud-based relational database engine, and hybrid cloud storage. Some comments on Overland Storage RAINcloud can be found at SearchStorage, while SearchDatabackup has some comments on Symantec break-up makeing sense for storage.

    For those of you who speak Dutch, here is an interview (via it-infra.nl) I did when Holland earlier this year about storage and your business.

    View other industry trends comments here

    Tips and Articles

    View recent as well as past tips and articles here

    StorageIOblog posts

    Recent StorageIOblog posts include:

    View other recent as well as past blog posts here

    In This Issue

  • Industry Trends Perspectives
  • Commentary in the news
  • Tips and Articles
  • StorageIOblog posts

    • Events & Activities

    November 11-13, 2014
    AWS re:Invent Las Vegas

    View other recent and upcoming events here

    Webinars

    December 11, 2014 – BrightTalk
    Server & Storage I/O Performance

    December 10, 2014 – BrightTalk
    Server & Storage I/O Decision Making

    December 9, 2014 – BrightTalk
    Virtual Server and Storage Decision Making

    December 3, 2014 – BrightTalk
    Data Protection Modernization

    November 13 9AM PT – BrightTalk
    Software Defined Storage

    November 11 10AM PT
    Google+ Hangout Dell BackupU

    November 11 9AM PT – BrightTalk
    Software Defined Data Centers

    Videos and Podcasts

    VMworld 2014 review
    Video: Click to view VMworld 2014 update

    StorageIO podcasts are also available via and at StorageIO.tv

    From StorageIO Labs

    Research, Reviews and Reports

    Lenovo ThinkServer TD340
    Earlier this year I did a review of the Lenovo ThinkServer TS140 in the StorageIO Labs (see the review here), in fact I ended up buying a TS140 after the review, and a few months back picked up yet another one. This StorageIOlab review looks at the Lenovo ThinkServer TD340 Tower Server which besides having a larger model number than the TS140, it also has a lot more capabilities (server compute, memory, I/O slots and internal hot-swap storage bays. Read more about the TD340 here.

    Resources and Links

    Check out these useful links and pages:
    storageio.com/links
    objectstoragecenter.com
    storageioblog.com/data-protection-diaries-main/
    storageio.com/ssd
    storageio.com/ssd

    Ok, nuff said (for now)

    Cheers
    Gs

    Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press), The Green and Virtual Data Center (CRC Press) and Resilient Storage Networks (Elsevier)
    twitter @storageio

    All Comments, (C) and (TM) belong to their owners/posters, Other content (C) Copyright 2006-2024 Server StorageIO and UnlimitedIO LLC All Rights Reserved

    Posted on

    StorageIO Out and About Update – VMworld 2014

    StorageIO Out and About Update – VMworld 2014

    Here is a quick video montage or mash-up if you prefer that Cory Peden (aka the Server and StorageIO Intern @Studentof_IT) put together using some video that recorded while at VMworld 2014 in San Francisco. In this YouTube video we take a quick tour around the expo hall to see who as well as what we run into while out and about.

    VMworld 2014 StorageIO Update
    Click on above image to view video

    For those of you who were at VMworld 2014 the video (click above image) will give you a quick Dejavu memory of the sites and sounds while for those who were not there, see what you missed to plan for next year. Watch for appearances from Gina Minks (@Gminks) aka Gina Rosenthal (of BackupU)and Michael (not Dell) of Dell Data Protection, Luigi Danakos (@Nerdblurt) of HP Data Protection who lost his voice (tweet Luigi if you can help him find his voice). With Luigi we were able to get in a quick game of buzzword bingo before catching up with Marc Farley (@Gofarley) and John Howarth of Quaddra Software. Mark and John talk about their new solution from Quaddra which will enable searching and discovering data across different storage systems and technologies.  

    Other visits include a quick look at an EVO:Rail from Dell, along with Docker for Smarties overview with Nathan LeClaire (@upthecyberpunks) of Docker (click here to watch the extended interview with Nathan).

    Docker for smarties

    Check out the conversation with Max Kolomyeytsev of StarWind Software (@starwindsan) before we get interrupted by a sales person. During our walk about, we also bump into Mark Peters (@englishmdp) of ESG facing off video camera to video camera.

    Watch for other things including rack cabinets that look like compute servers yet that have a large video screen so they can be software defined for different demo purposes.

    virtual software defined server

    Watch for more Server and StorageIO Industry Trend Perspective podcasts, videos as well as out and about updates soon, meanwhile check out others here.

    Ok, nuff said (for now)

    Cheers gs

    Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press), The Green and Virtual Data Center (CRC Press) and Resilient Storage Networks (Elsevier)
    twitter @storageio

    All Comments, (C) and (TM) belong to their owners/posters, Other content (C) Copyright 2006-2024 Server StorageIO and UnlimitedIO LLC All Rights Reserved

    Posted on

    Seagate 1200 12Gbs Enterprise SAS SSD StorgeIO lab review

    Seagate 1200 12Gbs Enterprise SAS SSD StorgeIO lab review

    This is the first post of a two part series, read the second post here.

    Earlier this year I had the opportunity to test drive some Seagate 1200 12Gbs Enterprise SAS SSD’s as a follow-up to some earlier activity trying their Enterprise TurboBoost Drives. Disclosure: Seagate has been a StorageIO client and was also the sponsor of this white paper and associated proof-points mentioned in this post.

    The question to ask yourself is not if flash Solid State Device (SSD) technologies are in your future, Instead the questions are when, where, using what, how to configure and related themes. SSD including traditional DRAM and NAND flash-based technologies are like real estate where location matters; however, there are different types of properties to meet various needs. This means leveraging different types of NAND flash SSD technologies in different locations in a complementary and cooperative aka hybrid way. For example nand flash SSD as part of an enterprise tiered storage strategy can be implemented server-side using PCIe cards, SAS and SATA drives as targets or as cache along with software, as well as leveraging SSD devices in storage systems or appliances.

    Seagate 1200 SSD
    Seagate 1200 Enterprise SAS 12Gbs SSD Image via Seagate.com

    Another place where nand flash can be found and compliments SSD devices are so-called Solid State Hybrid Drives (SSHD) or Hybrid Hard Disk Drives (HHDD) including a new generation that accelerate writes as well as reads such as those Seagate refers to as with Enterprise TurboBoost. The Enterprise TurboBoost drives (view the companion StorageIO Lab review TurboBoost white paper here) were previously known as the Solid State Hybrid Drives (SSHD) or Hybrid Hard Disk Drives (HHDD). Read more about TurboBoost here and here.

    The best server and storage I/O is the one you do not have to do

    Keep in mind that the best server or storage I/O is that one that you do not have to do, with the second best being the one with the least overhead resolved as close to the processor (compute) as possible or practical. The following figure shows that the best place to resolve server and storage I/O is as close to the compute processor as possible however only a finite amount of storage memory located there. This is where the server memory and storage I/O hierarchy comes into play which is also often thought of in the context of tiered storage balancing performance and availability with cost and architectural limits.

    Also shown is locality of reference which refers to how close data is to where it is being used and includes cache effectiveness or buffering. Hence a small amount of cache of flash and DRAM in the right location can have a large benefit. Now if you can afford it, install as much DRAM along with flash storage as possible, however if you are like most organizations with finite budgets yet server and storage I/O challenges, then deploy a tiered flash storage strategy.

    flash cache locality of reference
    Server memory storage I/O hierarchy, locality of reference

    Seagate 1200 12Gbs Enterprise SAS SSD’s

    Back to the Seagate 1200 12Gbs Enterprise SAS SSD which is covered in this StorageIO Industry Trends Perspective thought leadership white paper. The focus of the white paper is to look at how the Seagate 1200 Enterprise class SSD’s and 12Gbps SAS address current and next generation tiered storage for virtual, cloud, traditional Little and Big Data infrastructure environments.

    Seagate 1200 Enteprise SSD

    This includes providing proof points running various workloads including Database TPC-B, TPC-E and Microsoft Exchange in the StorageIO Labs along with cache software comparing SSD, SSHD and different HDD’s including 12Gbs SAS 6TB near-line high-capacity drives.

    Seagate 1200 Enterprise SSD Proof Points

    The proof points in this white paper are from an applications focus perspective representing more of an end-to-end real-world situation. While they are not included in this white paper, StorageIO has run traditional storage building-block focus workloads, which can be found at StorageIOblog (Part II: How many IOPS can a HDD, HHDD or SSD do with VMware?). These include tools such as Iometer, iorate, vdbench among others for various IO sizes, mixed, random, sequential, reads, writes along with “hot-band" across different number of threads (concurrent users). “Hot-Band” is part of the SNIA Emerald energy effectiveness metrics for looking at sustained storage performance using tools such as vdbench. Read more about other various server and storage I/O benchmarking tools and techniques here.

    For the following series of proof-points (TPC-B, TPC-E and Exchange) a system under test (SUT) consisted of a physical server (described with the proof-points) configured with VMware ESXi along with guests virtual machines (VMs) configured to do the storage I/O workload. Other servers were used in the case of TPC workloads as application transactional requester to drive the SQL Server database and resulting server storage I/O workload. VMware was used in the proof-points to reflect a common industry trend of using virtual server infrastructures (VSI) supporting applications including database, email among others. For the proof-point scenarios, the SUT along with storage system device under test were dedicated to that scenario (e.g. no other workload running) unless otherwise noted.

    Server Storage I/O config
    Server Storage I/O configuration for proof-points

    Microsoft Exchange Email proof-point configuration

    For this proof-point, Microsoft Jet Stress Exchange performance workloads were placed (e.g. Exchange Database – EDB file) on each of the different devices under test with various metrics shown including activity rates and response time for reads as well as writes. For the Exchange testing, the EDB was placed on the device being tested while its log files were placed on a separate Seagate 400GB Enterprise 12Gbps SAS SSD.

    Test configuration: Seagate 400GB 12000 2.5” SSD (ST400FM0073) 12Gbps SAS, 600GB 2.5” Enterprise 15K with TurboBoost™ (ST600MX) 6 Gbps SAS, 600GB 2.5” Enterprise Enhanced 15K V4 (15K RPM) HDD (ST600MP) with 6 Gbps SAS, Seagate Enterprise Capacity Nearline (ST6000NM0014) 6TB 3.5” 7.2K RPM HDD 12 Gbps SAS and 3TB 7.2K SATA HDD. Email server hosted as guest on VMware vSphere/ESXi V5.5, Microsoft SBS2011 Service Pack 1 64 bit. Guest VM (VMware vSphere 5.5) was on a SSD based dat, had a physical machine (host), with 14 GB DRAM, quad CPU (4 x 3.192GHz) Intel E3-1225 v300, with LSI 9300 series 12Gbps SAS adapters in a PCIe Gen 3 slot with Jet Stress 2010.  All devices being tested were Raw Device Mapped (RDM) where EDB resided. VM on a SSD based separate data store than devices being tested. Log file IOPs were handled via a separate SSD device also persistent (no delayed writes). EDB was 300GB and workload ran for 8 hours.

    Microsoft Exchange VMware SSD performance
    Microsoft Exchange proof-points comparing various storage devices

    TPC-B (Database, Data Warehouse, Batch updates) proof-point configuration

    SSD’s are a good fit for both transaction database activity with reads and write as well as query-based decision support systems (DSS), data warehouse and big data analytics. The following are proof points of SSD capabilities for database activity. In addition to supporting database table files and objects, along with transaction journal logs, other uses include for meta-data, import/export or other high-IO and write intensive scenarios. Two database workload profiles were tested including batch update (write-intensive) and transactional. Activity involved running Transaction Performance Council (TPC) workloads TPC-B (batch update) and TPC-E (transaction/OLTP simulate financial trading system) against Microsoft SQL Server 2012 databases. Each test simulation had the SQL Server database (MDF) on a different device with transaction log file (LDF) on a separate SSD. TPC-B for a single device results shown below.

    TPC-B (write intensive) results below show how TPS work being done (blue) increases from left to right (more is better) for various numbers of simulated users. Also shown on the same line for each amount of TPS work being done is the average latency in seconds (right to left) where lower is better. Results are shown from top to bottom for each group of users (100, 50, 20 and 1) for the different drives being tested (top to bottom). Note how the SSD device does more work at a lower response time vs. traditional HDD’s

    Test configuration: Seagate 400GB 12000 2.5” SSD (ST400FM0073) 12Gbps SAS, 600GB 2.5” Enterprise 15K with TurboBoost™ (ST600MX) 6 Gbps SAS, 600GB 2.5” Enterprise Enhanced 15K V4 (15K RPM) HDD (ST600MP) with 6 Gbps SAS, Seagate Enterprise Capacity Nearline (ST6000NM0014) 6TB 3.5” 7.2K RPM HDD 12 Gbps SAS and 3TB Seagate 7.2K SATA HDD Workload generator and virtual clients Windows 7 Ultimate 64 bit. Microsoft SQL Server 2012 database was on Windows 7 guest. Guest VM (VMware vSphere 5.5) had a dedicated 14 GB DRAM, quad CPU (4 x 3.192GHz) Intel E3-1225 v300, with LSI 9300 series 12Gbps SAS adapters in a PCIe Gen 3 slot along with TPC-B (www.tpc.org) workloads.

    VM with guest OS along with SQL tempdb and masterdb resided on separate SSD based data store from devices being tested (e.g., where MDF (main database tables) and LDF (log file) resided). All devices being tested were Raw Device Mapped (RDM) independent persistent with database log file on a separate SSD device also persistent (no delayed writes) using VMware PVSCSI driver. MDF and LDF file sizes were 142GB and 26GB with scale factor of 10000, with each step running for one hour (10-minute preamble). Note that these proof-points DO NOT use VMware or any other third-party cache software or I/O acceleration tool technologies as those are covered later in a separate proof-point.

    TPC-B sql server database SSD performance
    TPC-B SQL Server database proof-points comparing various storage devices

    TPC-E (Database, Financial Trading) proof-point configuration

    The following shows results from TPC-E test (OLTP/transactional workload) simulating a financial trading system. TPC-E is an industry standard workload that performs a mix of reads and writes database queries. Proof-points were performed with various numbers of users from 10, 20, 50 and 100 to determine (TPS) Transaction per Second (aka I/O rate) and response time in seconds. The TPC-E transactional results are shown for each device being tested across different user workloads. The results show how TPC-E TPS work (blue) increases from left to right (more is better) for larger numbers of users along with corresponding latency (green) that goes from right to left (less is better). The Seagate Enterprise 1200 SSD is shown on the top in the figure below with a red box around its results. Note how the SSD as a lower latency while doing more work compared to the other traditional HDD’s

    Test configuration: Seagate 400GB 12000 2.5” SSD (ST400FM0073) 12Gbps SAS, 600GB 2.5” Enterprise 15K with TurboBoost™ (ST600MX) 6 Gbps SAS, 600GB 2.5” Enterprise Enhanced 15K V4 (15K RPM) HDD (ST600MP) with 6 Gbps SAS, Seagate Enterprise Capacity Nearline (ST6000NM0014) 6TB 3.5” 7.2K RPM HDD 12 Gbps SAS and 3TB Seagate 7.2K SATA HDD Workload generator and virtual clients Windows 7 Ultimate 64 bit. Microsoft SQL Server 2012 database was on Windows 7 guest. Guest VM (VMware vSphere 5.5) had a dedicated 14 GB DRAM, quad CPU (4 x 3.192GHz) Intel E3-1225 v300, with LSI 9300 series 12Gbps SAS adapters in a PCIe Gen 3 slot along with TPC-B (www.tpc.org) workloads.

    VM with guest OS along with SQL tempdb and masterdb resided on separate SSD based data store from devices being tested (e.g., where MDF (main database tables) and LDF (log file) resided). All devices being tested were Raw Device Mapped (RDM) independent persistent with database log file on a separate SSD device also persistent (no delayed writes) using VMware PVSCSI driver. MDF and LDF file sizes were 142GB and 26GB with scale factor of 10000, with each step running for one hour (10-minute preamble). Note that these proof-points DO NOT use VMware or any other third-party cache software or I/O acceleration tool technologies as those are covered later in a separate proof-point.

    TPC-E sql server database SSD performance
    TPC-E (Financial trading) SQL Server database proof-points comparing various storage devices

    Continue reading part-two of this two-part series here including the virtual server storage I/O blender effect and solution.

    Ok, nuff said (for now).

    Cheers gs

    Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press), The Green and Virtual Data Center (CRC Press) and Resilient Storage Networks (Elsevier)
    twitter @storageio

    All Comments, (C) and (TM) belong to their owners/posters, Other content (C) Copyright 2006-2024 Server StorageIO and UnlimitedIO LLC All Rights Reserved

    Posted on

    Part II: Seagate 1200 12Gbs Enterprise SAS SSD StorgeIO lab review

    Part II: Seagate 1200 12Gbs Enterprise SAS SSD StorgeIO lab review

    This is the second post of a two part series, read the first post here.

    Earlier this year I had the opportunity to test drive some Seagate 1200 12Gbs Enterprise SAS SSD’s as a follow-up to some earlier activity trying their Enterprise TurboBoost Drives. Disclosure: Seagate has been a StorageIO client and was also the sponsor of this white paper and associated proof-points mentioned in this post.

    The Server Storage I/O Blender Effect Bottleneck

    The earlier proof-points focused on SSD as a target or storage device. In the following proof-points, the Seagate Enterprise 1200 SSD is used as a shared read cache (write-through). Using a write-through cache enables a given amount of SSD to give a performance benefit to other local and networked storage devices.

    traditional server storage I/O
    Non-virtualized servers with dedicated storage and I/O paths.

    Aggregation causes aggravation with I/O bottlenecks because of consolidation using server virtualization. The following figure shows non-virtualized servers with their own dedicated physical machine (PM) and I/O resources. When various servers are virtualized and hosted by a common host (physical machine), their various workloads compete for I/O and other resources. In addition to competing for I/O performance resources, these different servers also tend to have diverse workloads.

    virtual server storage I/O blender
    Virtual server storage I/O blender bottleneck (aggregation causes aggravation)

    The figure above shows aggregation causing aggravation with the result being I/O bottlenecks as various applications performance needs converge and compete with each other. The aggregation and consolidation result is a blend of random, sequential, large, small, read and write characteristics. These different storage I/O characteristics are mixed up and need to be handled by the underlying I/O capabilities of the physical machine and hypervisor. As a result, a common deployment for SSD in addition to as a target device for storing data is as a cache to cut bottlenecks for traditional spinning HDD.

    In the following figure a solution is shown introducing I/O caching with SSD to help mitigate or cut the effects of server consolation causing performance aggravations.

    Creating a server storage I/O blender bottleneck

    xxxxx
    Addressing the VMware Server Storage I/O blender with cache

    Addressing server storage I/O blender and other bottlenecks

    For these proof-points, the goal was to create an I/O bottleneck resulting from multiple VMs in a virtual server environment performing application work. In this proof-point, multiple competing VMs including a SQL Server 2012 database and an Exchange server shared the same underlying storage I/O infrastructure including HDD’s The 6TB (Enterprise Capacity) HDD was configured as a VMware dat and allocated as virtual disks to the VMs. Workloads were then run concurrently to create an I/O bottleneck for both cached and non-cached results.

    xxxxx
    Server storage I/O with virtualization roof-point configuration topology

    The following figure shows two sets of proof points, cached (top) and non-cached (bottom) with three workloads. The workloads consisted of concurrent Exchange and SQL Server 2012 (TPC-B and TPC-E) running on separate virtual machine (VM) all on the same physical machine host (SUT) with database transactions being driven by two separate servers. In these proof-points, the applications data were placed onto the 6TB SAS HDD to create a bottleneck, and a portion of the SSD used as a cache. Note that the Virtunet cache software allows you to use a part of a SSD device for cache with the balance used as a regular storage target should you want to do so.

    If you have paid attention to the earlier proof-points, you might notice that some of the results below are not as good as those seen in the Exchange, TPC-B and TPC-E results about. The reason is simply that the earlier proof-points were run without competing workloads, and database along with log or journal files were placed on separate drives for performance. In the following proof-point as part of creating a server storage I/O blender bottleneck the Exchange, TPC-B as well as TPC-E workloads were all running concurrently with all data on the 6TB drive (something you normally would not want to do).

    storage I/O blender solved
    Solving the VMware Server Storage I/O blender with cache

    The cache and non-cached mixed workloads shown above prove how an SSD based read-cache can help to reduce I/O bottlenecks. This is an example of addressing the aggravation caused by aggregation of different competing workloads that are consolidated with server virtualization.

    For the workloads shown above, all data (database tables and logs) were placed on VMware virtual disks created from a dat using a single 7.2K 6TB 12Gbps SAS HDD (e.g. Seagate Enterprise Capacity).

    The guest VM system disks which included paging, applications and other data files were virtual disks using a separate dat mapped to a single 7.2K 1TB HDD. Each workload ran for eight hours with the TPC-B and TPC-E having 50 simulated users. For the TPC-B and TPC-E workloads, two separate servers were used to drive the transaction requests to the SQL Server 2012 database.

    For the cached tests, a Seagate Enterprise 1200 400GB 12Gbps SAS SSD was used as the backing store for the cache software (Virtunet Systems Virtucache) that was installed and configured on the VMware host.

    During the cached tests, the physical HDD for the data files (e.g. 6TB HDD) and system volumes (1TB HDD) were read cache enabled. All caching was disabled for the non-cached workloads.

    Note that this was only a read cache, which has the side benefit of off-loading those activities enabling the HDD to focus on writes, or read-ahead. Also note that the combined TPC-E, TPC-B and Exchange databases, logs and associated files represented over 600GB of data, there was also the combined space and thus cache impact of the two system volumes and their data. This simple workload and configuration is representative of how SSD caching can complement high-capacity HDD’s

    Seagate 6TB 12Gbs SAS high-capacity HDD

    While the star and focus of these series of proof-points is the Seagate 1200 Enterprise 12Gbs SAS SSD, the caching software (virtunet) and Enterprise TurboBoost drives also play key supporting and favorable roles. However the 6TB 12Gbs SAS high-capacity drive caught my attention from a couple of different perspectives. Certainly the space capacity was interesting along with a 12Gbs SAS interface well suited for near-line, high-capacity and dense tiered storage environments. However for a high-capacity drive its performance is what really caught my attention both in the standard exchange, TPC-B and TPC-E workloads, as well as when combined with SSD and cache software.

    This opens the door for a great combination of leveraging some amount of high-performance flash-based SSD (or TurboBoost drives) combined with cache software and high-capacity drives such as the 6TB device (Seagate now has larger versions available). Something else to mention is that the 6TB HDD in addition to being available in either 12Gbs SAS, 6Gbs SAS or 6Gbs SATA also has enhanced durability with a Read Bit Error Rate of 10 ^15 (e.g. 1 second read error per 10^15 average attempts) and an AFR (annual failure rate) of 0.63% (See more speeds and feeds here). Hence if you are concerned about using large capacity HDD’s and them failing, make sure you go with those that have a high Read Bit Error Rate and a low AFR which are more common with enterprise class vs. lower cost commodity or workstation drives. Note that these high-capacity enterprise HDD’s are also available with Self-Encrypting Drive (SED) options.

    Summary

    Read more in this StorageIO Industry Trends and Perspective (ITP) white paper compliments of Seagate 1200 12Gbs SAS SSD’s and visit the Seagate Enterprise 1200 12Gbs SAS SSD page here. Moving forward there is the notion that flash SSD will be everywhere. There is a difference between all data on flash SSD vs. having some amount of SSD involved in preserving, serving and protecting (storing) information.

    Key themes to keep in mind include:

    • Aggregation can cause aggravation which SSD can alleviate
    • A relative small amount of flash SSD in the right place can go a long way
    • Fast flash storage needs fast server storage I/O access hardware and software
    • Locality of reference with data close to applications is a performance enabler
    • Flash SSD everywhere does not mean everything has to be SSD based
    • Having some amount of flash in different places is important for flash everywhere
    • Different applications have various performance characteristics
    • SSD as a storage device or persistent cache can speed up IOPs and bandwidth

    Flash and SSD are in your future, this comes back to the questions of how much flash SSD do you need, along with where to put it, how to use it and when.

    Ok, nuff said (for now).

    Cheers gs

    Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press), The Green and Virtual Data Center (CRC Press) and Resilient Storage Networks (Elsevier)
    twitter @storageio

    All Comments, (C) and (TM) belong to their owners/posters, Other content (C) Copyright 2006-2024 Server StorageIO and UnlimitedIO LLC All Rights Reserved

    Posted on

    Is Computer Data Storage Complex? It Depends

    Is Computer Data Storage Complex? It Depends

    I often get asked, or, told that computer data storage is complex with so many options to choose from, apples to oranges comparison among other things.

    On a recent trip to Europe while being interviewed by a Dutch journalist in Nijkerk Holland at a Brouwer Storage Consultancy event I was presenting at, the question came up again about storage complexity. Btw, you can read the article on data storage industry trends here (its in dutch).

    I hesitated and thought for a moment and responded that in some ways it’s not as complex as some make it seem, although there is more to data storage than just cost per capacity. As I usually do when asked or told how complex data storage is my response is a mixed yes it (storage, data and information infrastructure) are complex, however lets put it in perspective which is storage any more complex than other things?

    Our conversation then evolved with an example that I find shopping for an automobile complex unless I know exactly what I’m looking for. After all there are cars trucks SUV’s used new buy lease different manufacturers makes and models speeds cargo capacity management tools and interfaces not to mention metrics and fuel.

    This is where I usually mention how IMHO buying a new car or vehicle is with all the different options, that is unless you know what you want, or know your selection criteria and options. Same with selecting a new laptop computer, tablet or smart phone, not to mention a long list of other things that to the outsiders can also seem complex, intimidating or overwhelming. However lets take a step back to look at storage then return to compare some other things that may be confusing to those who are not focused on them.

    Stepping back looking at storage

    Similar to other technologies, there are different types of data storage to meet various needs from performance to space capacity as well as support various forms of scaling.

    server and storage I/O flow
    Server and storage I/O fundamentals

    Storage options
    Various types of storage devices including HDD’s, SSHD/HHDD’s and SSD’s

    Storage type options
    Various types of storage devices

    Storage I/O decision making
    Storage options, block, file, object, ssd, hdd, primary, secondary, local and cloud

    Shopping for other things can be complex

    During my return trip to the US from the Dutch event, I had a layover at London Heathrow (LHR) and walking the concourse it occurred to me that while there are complexities involved with different technologies including storage, data and information infrastructures, there were other complexities.

    Same thing with shoes so any differ options not to mention cell phones or laptops and tablets, PCIe, or how about tv’s?

    I wan to go on a trip do I book based on lowest cost for air fare then hotel and car rental, or do I purchase a package? For the air fare is it the cheapest yet that takes all day to get from point a to b via plane changes at points c d and e not to mention paying extra fees vs paying a higher price for a direct flight with extra amenities?

    Getting hungry so what to do for dinner, what type of cuisine or food?

    Hand Baggage options
    How about a new handbag or perhaps shoes?

    Baggage options
    How about a new backpack, brief case or luggage?

    Beverage options
    What to drink for a beverage, so many options unless you know what you want.

    PDA options
    Complexity of choosing what cell phone, PDA or other electronics

    What to read options
    How about what to read including print vs. online accessible content?

    How about auto parts complexity

    Once I got home from my European trip I had some mechanical things to tend to including replacing some spark plugs.

    Auto part options
    How about automobile parts from tires, to windshield wiper blades to spark plugs?

    Sure if you know the exact part number and assuming that part number has not changed, then you can start shopping for the part. However recently I had a part number based on a vehicle serial number (e.g. make, model, year, etc) only to receive the wrong part. Sure the part numbers were correct, however along the line somewhere the manufacture made a change and not all downstream vendors knew about the part change, granted I eventually received the correct part.

    Back to tech and data infrastructures

    Ok, hopefully you got the point from the above examples among many others in that we live in world full of options and those options can bring complexity.

    What type of network or server? How about operating system, browser, database, programming or development language as there are different needs and options?

    Sure there are many storage options as not everything is the same.

    Likewise while there can be simple answer with a trend of what to use before the question is understood (perhaps due to a preference) or explained, the best or applicable answer may be it depends. However saying it depends may seem complex to those who just want a simple answer.

    Closing Comments

    So is storage more complex than other technologies, tools, products or services?

    What say you?

    Ok, nuff said, for now…

    Cheers
    Gs

    Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press), The Green and Virtual Data Center (CRC Press) and Resilient Storage Networks (Elsevier)
    twitter @storageio

    All Comments, (C) and (TM) belong to their owners/posters, Other content (C) Copyright 2006-2024 Server StorageIO and UnlimitedIO LLC All Rights Reserved