Power and Cooling Archives

August 12, 2013November 26, 2023

Viking SATADIMM: Nand flash SATA SSD in DDR3 DIMM slot?

Storage I/O trends

Today computer and data storage memory vendor Viking announced that SSD vendor Solidfire has deployed their SATADIMM modules in DDR3 DIMM (e.g. Random Access Memory (RAM) main memory) slots of their SF SSD based storage solution.

solidfire ssd storage with satadimm
Solidfire SD solution with SATADIMM via Viking

Nand flash SATA SSD in a DDR3 DIMM slot?

Per Viking, Solidfire uses the SATADIMM as boot devices and cache to complement the normal SSD drives used in their SF SSD storage grid or cluster. For those not familiar, Solidfire SF storage systems or appliances are based on industry standard servers that are populated with SSD devices which in turn are interconnected with other nodes (servers) to create a grid or cluster of SSD performance and space capacity. Thus as nodes are added, more performance, availability and capacity are also increased all of which are accessed via iSCSI. Learn more about Solidfire SD solutions on their website here.

Here is the press release that Viking put out today:

Viking Technology SATADIMM Increases SSD Capacity in SolidFire’s Storage System (Press Release)

Viking Technology’s SATADIMM enables higher total SSD capacity for SolidFire systems, offering cloud infrastructure providers an optimized and more powerful solution

FOOTHILL RANCH, Calif., August 12, 2013 – Viking Technology, an industry leading supplier of Solid State Drives (SSDs), Non-Volatile Dual In-line Memory Module (NVDIMMs), and DRAM, today announced that SolidFire has selected its SATADIMM SSD as both the cache SSD and boot volume SSD for their storage nodes. Viking Technology’s SATADIMM SSD enables SolidFire to offer enhanced products by increasing both the number and the total capacity of SSDs in their solution.

“The Viking SATADIMM gives us an additional SSD within the chassis allowing us to dedicate more drives towards storage capacity, while storing boot and metadata information securely inside the system,” says Adam Carter, Director of Product Management at SolidFire. “Viking’s SATADIMM technology is unique in the market and an important part of our hardware design.”

SATADIMM is an enterprise-class SSD in a Dual In-line Memory Module (DIMM) form factor that resides within any empty DDR3 DIMM socket. The drive enables SSD caching and boot capabilities without using a hard disk drive bay. The integration of Viking Technology’s SATADIMM not only boosts overall system performance but allows SolidFire to minimize potential human errors associated with data center management, such as accidentally removing a boot or cache drive when replacing an adjacent failed drive.

“We are excited to support SolidFire with an optimal solid state solution that delivers increased value to their customers compared to traditional SSDs,” says Adrian Proctor, VP of Marketing, Viking Technology. “SATADIMM is a solid state drive that takes advantage of existing empty DDR3 sockets and provides a valuable increase in both performance and capacity.”

SATADIMM is a 6Gb SATA SSD with capacities up to 512GB. A next generation SAS solution with capacities of 1TB & 2TB will be available early in 2014. For more information, visit our website www.vikingtechnology.com or email us at sales@vikingtechnology.com.

Sales information is available at: www.vikingtechnology.com, via email at sales@vikingtechnology.com or by calling (949) 643-7255.

About Viking Technology Viking Technology is recognized as a leader in NVDIMM technology. Supporting a broad range of memory solutions that bridge DRAM and SSD, Viking delivers solutions to OEMs in the enterprise, high-performance computing, industrial and the telecommunications markets. Viking Technology is a division of Sanmina Corporation (Nasdaq: SANM), a leading Electronics Manufacturing Services (EMS) provider. More information is available at www.vikingtechnology.com.

About SolidFire SolidFire is the market leader in high-performance data storage systems designed for large-scale public and private cloud infrastructure. Leveraging an all-flash scale-out architecture with patented volume-level quality of service (QoS) control, providers can now guarantee storage performance to thousands of applications within a shared infrastructure. In-line data reduction techniques along with system-wide automation are fueling new block-storage services and advancing the way the world uses the cloud.

What’s inside the press release

On the surface this might cause some to jump to the conclusion that the nand flash SSD is being accessed via the fast memory bus normally used for DRAM (e.g. main memory) of a server or storage system controller. For some this might even cause a jump to conclusion that Viking has figured out a way to use nand flash for reads and writes not only via a DDR3 DIMM memory location, as well as doing so with the Serial ATA (SATA) protocol enabling server boot and use by any operating system or hypervisors (e.g. VMware vSphere or ESXi, Microsoft Hyper-V, Xen or KVM among others).

Note for those not familiar or needing a refresh on DRAM, DIMM and related items, here is an excerpt from Chapter 7 (Servers – Physical, Virtual and Software) from my book "The Green and Virtual Data Center" (CRC Press).

7.2.2 Memory

Computers rely on some form of memory ranging from internal registers, local on-board processor Level 1 (L1) and Level 2 (L2) caches, random accessible memory (RAM), non-volatile RAM (NVRAM) or Flash along with external disk storage. Memory, which includes external disk storage, is used for storing operating system software along with associated tools or utilities, application programs and data. Read more of the excerpt here…

Is SATADIMM memory bus nand flash SSD storage?

In short no.

Some vendors or their surrogates might be tempted to spin such a story by masking some details to allow your imagination to run wild a bit. When I saw the press release announcement I reached out to Tinh Ngo (Director Marketing Communications) over at Viking with some questions. I was expecting the usual marketing spin story, dancing around the questions with long answers or simply not responding with anything of substance (or that requires some substance to believe). Again what I found was the opposite and thus want to share with you some of the types of questions and answers.

So what actually is SATADIMM? See for yourself in the following image (click on it to view or Viking site).

Via Viking website, click on image or here to learn more about SATADIMM

Does SATADIMM actually move data via DDR3 and memory bus? No, SATADIMM only draws power from it (yes nand flash does need power when in use contrary to a myth I was told about).

Wait, then how is data moved and how does it get to and through the SATA IO stack (hardware and software)?

Simple, there is a cable connector that attached to the SATADIMM that in turn attached to an internal SATA port. Or using a different connector cable attach the SATADIMM (up to four) to a standard SAS internal port such as on a main board, HBA, RAID or caching adapter.

industry trend

Does that mean that Viking and who ever uses SATADIMM is not actually moving data or implementing SATA via the memory bus and DDR3 DIMM sockets? That would be correct, data movement occurs via cable connection to standard SATA or SAS ports.

Wait, why would I give up a DDR3 DIMM socket in my server that could be used for more DRAM? Great question and one that should be it depends on if you need more DRAM or more nand flash? If you are out of drive slots or PCIe card slots and have enough DRAM for your needs along with available DDR3 slots, you can stuff more nand flash into those locations assuming you have SAS or SATA connectivity.

SATADIMM with SATA connector top right via Viking

SATADIMM SATA connector via Viking

satadimm sas connector
SATADIMM SAS (Internal) connector via Viking

Why not just use the onboard USB ports and plug-in some high-capacity USB thumb drives to cut cost? If that is your primary objective it would probably work and I can also think of some other ways to cut cost. However those are also probably not the primary tenants that people looking to deploy something like SATADIMM would be looking for.

What are the storage capacities that can be placed on the SATADIMM? They are available in different sizes up to 400GB for SLC and 480GB for MLC. Viking indicated that there are larger capacities and faster 12Gb SAS interfaces in the works which would be more of a surprise if there were not. Learn more about current product specifications here.

Good questions. Attached are three images that sort of illustrates the connector. As well, why not a USB drive; well, there are customers that put 12 of these in the system (with up to 480GB usable capacity) that equates to roughly an added 5.7TBs inside the box without touching the drive bays (left for mass HDD’s). You will then need to raid/connect) all the SATADIMM via a HBA.

How fast is the SATADIMM and does putting it into a DDR3 slot speed things up or slow them down? Viking has some basic performance information on their site (here). However generally should be the same or similar to reach a SAS or SATA SSD drive, although keep SSD metrics and performance in the proper context. Also keep in mind that the DDR3 DIMM slot is only being used for power and not real data movement.

Is the SATADIMM using 3Gbs or 6Gbs SATA? Good questions, today is 6Gb SATA (remember that SATA can attach to a SAS port however not vise versa). Lets see if Viking responds in the comments with more including RAID support (hardware or software) along with other insight such as UNMAP, TRIM, Advanced Format (AF) 4KByte blocks among other things.

Have I actually tried SATADIMM yet? No, not yet. However would like to give it a test drive and workout if one were to show up on my doorstep along with disclosure and share the results if applicable.

industry trend

Future of nand flash in DRAM DIMM sockets

Keep in mind that someday nand flash will actually seem not only in a Webex or Powerpoint demo preso (e.g. similar to what Diablo Technology is previewing), as well as in real use for example what Micron earlier this year predicted for flash on DDR4 (more DDR3 vs. DDR4 here).

Is SATADIMM the best nand flash SSD approach for every solution or environment? No, however it does give some interesting options for those who are PCIe card, or HDD and SSD drive slot constrained that also have available DDR3 DIMM sockets. As to price, check with Viking, wish I could say tell them Greg from StorageIO sent you for a good value, however not sure what they would say or do.

Ok, nuff said (for now).

Cheers
Gs

Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press), The Green and Virtual Data Center (CRC Press) and Resilient Storage Networks (Elsevier)

twitter @storageio

August 12, 2013November 21, 2019

Server and Storage IO Memory: DRAM and nand flash

Storage I/O trends

DRAM, DIMM, DDR3, nand flash memory, SSD, stating what’s often assumed

Often what’s assumed is not always the case. For example in along with around server, storage and IO networking circles including virtual as well as cloud environments terms such as nand (Negated AND or NOT And) flash memory aka (Solid State Device or SSD), DRAM (Dynamic Random Access Memory), DDR3 (Double Data Rate 3) not to mention DIMM (Dual Inline Memory Module) get tossed around with the assumption everybody must know what they mean.

On the other hand, I find plenty of people who are not sure what those among other terms or things are, sometimes they are even embarrassed to ask, particular if they are a self-proclaimed expert.

So for those who need a refresh or primer, here you go, an excerpt from Chapter 7 (Servers – Physical, Virtual and Software) from my book "The Green and Virtual Data Center" (CRC Press) available at Amazon.com and other global venues in print and ebook formats.

7.2.2 Memory

Computers rely on some form of memory ranging from internal registers, local on-board processor Level 1 (L1) and Level 2 (L2) caches, random accessible memory (RAM), non-volatile RAM (NVRAM) or nand Flash (SSD) along with external disk storage. Memory, which includes external disk storage, is used for storing operating system software along with associated tools or utilities, application programs and data. Main memory or RAM, also known as dynamic RAM (DRAM) chips, is packaged in different ways with a common form being dual inline memory modules (DIMMs) for notebook or laptop, desktop PC and servers.

RAM main memory on a server is the fastest form of memory, second only to internal processor or chip based registers, L1, L2 or local memory. RAM and processor based memories are volatile and non-persistent in that when power is removed, the contents of memory are lost. As a result, some form of persistent memory is needed to keep programs and data when power is removed. Read only memory (ROM) and NVRAM are both persistent forms of memory in that their contents are not lost when power is removed. The amount of RAM that can be installed into a server will vary with specific architecture implementation and operating software being used. In addition to memory capacity and packaging format, the speed of memory is also important to be able to move data and programs quickly to avoid internal bottlenecks. Memory bandwidth performance increases with the width of the memory bus in bits and frequency in MHz. For example, moving 8 bytes on a 64 bit buss in parallel at the same time at 100MHz provides a theoretical 800MByte/sec speed.

To improve availability and increase the level of persistence, some servers include battery backed up RAM or cache to protect data in the event of a power loss. Another technique to protect memory data on some servers is memory mirroring where twice the amount of memory is installed and divided into two groups. Each group of memory has a copy of data being stored so that in the event of a memory failure beyond those correctable with standard parity and error correction code (ECC) no data is lost. In addition to being fast, RAM based memories are also more expensive and used in smaller quantities compared to external persistent memories such as magnetic hard disk drives, magnetic tape or optical based memory medias.

Memory diagram
Memory and Storage Pyramid

The above shows a tiered memory model that may look familiar as the bottom part is often expanded to show tiered storage. At the top of the memory pyramid is high-speed processor memory followed by RAM, ROM, NVRAM and FLASH along with many forms of external memory commonly called storage. More detail about tiered storage is covered in chapter 8 (Data Storage – Data Storage – Disk, Tape, Optical, and Memory). In addition to being slower and lower cost than RAM based memories, disk storage along with NVRAM and FLASH based memory devices are also persistent.

By being persistent, when power is removed, data is retained on the storage or memory device. Also shown in the above figure is that on a relative basis, less energy is used for power storage or memory at the bottom of the pyramid than for upper levels where performance increases. From a PCFE (Power, Cooling, Floor space, Economic) perspective, balancing memory and storage performance, availability, capacity and energy to a given function, quality of service and service level objective for a given cost needs to be kept in perspective and not considering simply the lowest cost for the most amount of memory or storage. In addition to gauging memory on capacity, other metrics include percent used, operating system page faults and page read/write operations along with memory swap activity as well memory errors.

Base 2 versus base 10 numbering systems can account for some storage capacity that appears to “missing” when real storage is compared to what is expected to be seen. Disk drive manufacturers use base 10 (decimal) to count bytes of data while memory chip, server and operating system vendors typically use base 2 (binary) to count bytes of data. This has led to confusion when comparing a disk drive base 10 GB with a chip memory base 2 GB of memory capacity, such as 1,000,000,000 (10^9) bytes versus 1,073,741,824 (2^30) bytes. Nomenclature based on the International System of Units uses MiB, GiB and TiB to denote million, billion and trillion bytes for base 2 numbering with base 10 using MB, TB and GB . Most vendors do document how many bytes, sometimes in both base 2 and base 10, as well as the number of 512 byte sectors supported on their storage devices and storage systems, though it might be in the small print.

Ok, nuff said (for now).

Cheers
Gs

Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press), The Green and Virtual Data Center (CRC Press) and Resilient Storage Networks (Elsevier).

July 29, 2013November 26, 2023

Cloud, Virtual, Server, Storage I/O and other technology tiering

Storage I/O trends

Tiering technology and the right data center tool for a given task

Depending on who or what is your sphere of influence, or your sources of information and insight are, there will be different views of tiering, particular when it comes to tiered storage and storage tiering for cloud, virtual and traditional environments.

Recently I did piece over at 21st century IT (21cit) titled Tiered Storage Explained that looks at both tiered storage and storage tiering (e.g. movement and migration, automated or manual) that you can read here.

In the data center (or information factory) everything is not the same as different applications have various performance, availability, capacity and economics among other requirements. Consequently there are different levels or categories of service along with associated tiers of technology to support them, more on these in few moments.

Technology tiering is all around you

Tiering is not unique to Information Technology (IT) as it is more common than you may realize, granted, not always called tiering per say. For example there are different tiers of transportation (beside public or private, shared or single use) ranging from planes, trains, bicycles and boats among others.

Dutch Bikes Dutch Train Airbus A330 Gondola
Tiered transportation (Bikes, Trains, Planes, Gondolas)

Storage I/O trends

Moving beyond IT (we will get back to that shortly), there are other examples of tiered technologies. For example I live in the Stillwater / Minneapolis Minnesota area thus have a need for different types of snow movement and management tools, after all, not all snow situations are the same.

Snow plow
Tiered snow movement technology (Different tools for various tasks)

The other part of the year when the snow is not actually accumulating or the St. Croix river is not frozen which on a good year can be from March to November, its fishing time. That means having different types of fishing rods rigged for various things such as casting, trolling or jigging, not to mention big fish or little fish, something like how a golfer has different clubs. While like a golfer a single fishing rod can do the task, it’s not as practical thus different tools for various tasks.

Kyak Fishing Walleye Fish Big Fish
Different sizes and types of fish

Speaking of transportation and automobiles, there are also various metrics some of which have a correlation to Data Center energy use and effectiveness, not to mention EPA Energy Star for Data Centers and Data Center Storage.

Storage I/O trends

Technology tiering in and around the data center

IT data center

Now let’s get back to technology tiering the data center (or information factory) including tiered storage and storage tiering (here’s link to the tiered storage explained piece I mentioned earlier). The three primary building blocks for IT services are processing or compute (e.g. servers, workstations), networking or connectivity and storage that include hardware, software, management tools and applications. These resources in turn get accessed by yes you guessed it, different tiers or categories of devices from mobile smart phones, tablets, laptops, workstations or terminals browsers, applets and other presentation services.

IT building blocks, server, storage, networks

Lets focus on storage for a bit (pun intended)

Keep in mind that not everything is the same in the data center from a performance, availability, capacity and economic perspective. This means different threat risks to protect applications and data against, performance or space capacity needs among others.

Avoid treating all threat risks the same, tiered data protection

Part of modernizing data protection is aligning various tools and technologies to meet different requirements including Recovery Time Objectives (RTO) and Recovery Point Objectives (RPO) along with Service Level Agreements (SLAs) and Service Level Objectives (SLO’s).

In addition to protecting data and applications to meet various needs, there are also tiered storage mediums or media (e.g. HDD, SSD, Tape) along with storage systems.

Storage Tiers
Storage I/O trends

Excerpt, Chapter 9: Storage Services and Systems from my book Cloud and Virtual Data Storage Networking book (CRC Press) available via Amazon (also Kindle) and other venues.

9.2 Tiered Storage

Tiered storage is often referred to by the type of disk drives or media, by the price band, by the architecture or by its target use (online for files, emails and databases; near line for reference or backup; offline for archive). The intention of tiered storage is to configure various types of storage systems and media for different levels of performance, availability, capacity and energy or economics (PACE) capabilities to meet a given set of application service requirements. Other storage mediums such as HDD, SSD, magnetic tape and optical storage devices are also used in tiered storage.

Storage tiering can mean different things to different people. For some it is describing storage or storage systems tied to business, application or information services delivery functional need. Others classify storage tiers by price band or how much the solution costs. For others it’s the size or capacity or functionality. Another way to think of tiering is by where it will be used such as on-line, near-line or off-line (primary, secondary or tertiary). Price bands are a way of categorizing disk storage systems based on price to align with various markets and usage scenarios. For example consumer, small office home office (SOHO) and low-end SMB in a price band of under $5,000 USD, mid to high-end SMB in middle price bands from $50,000 to $100,000 range, and small to large enterprise systems ranging from a few hundred thousand dollars to millions of dollars.

Another method of classification is by high performance active or high-capacity inactive or idle. Storage tiering is also used in the context of different mediums such as high performance solid state devices (SSD) or 15,500 revolution per minute (15.5K RPM) SAS of Fibre Channel hard disk drives (HDD), or slower 7.2K and 10K high-capacity SAS and SATA drives or magnetic tape. Yet another category is internal dedicated, external shared, networked and cloud accessible using different protocols and interfaces. Adding to the confusion are marketing approaches that emphasize functionality as defining a tier in trying to standout and differentiate above competition. In other words, if you can’t beat someone in a given category or classification then just create a new one.

Another dimension of tiered storage is tiered access, meaning the type of storage I/O interface and protocol or access method used for storing and retrieving data. For example, high-speed 8Gb Fibre Channel (8GFC) and 10GbE Fibre Channel over Ethernet (FCoE) versus older and slower 4GFC or low-cost 1Gb Ethernet (1GbE) or high performance 10GbE based iSCSI for shared storage access or serial attached SCSI (SAS) for direct attached storage (DAS) or shared storage between a pair of clustered servers. Additional examples of tiered access include file or NAS based access of storage using network file system (NFS) or Windows-based Common Internet File system (CIFS) file sharing among others.

Different categories of storage systems, also called tiered storage systems, combine various tiered storage mediums with tiered access and tiered data protection. For example, tiered data protection includes local and remote mirroring, in different RAID levels, point-in-time (pit) copies or snapshots and other forms of securing and maintaining data integrity to meet various service level, RTO and RPO requirements. Regardless of the approach or taxonomy, ultimately, tiered servers, tiered hypervisors, tiered networks, tiered storage and tiered data protection are about and need to map back to the business and applications functionality.

Storage I/O trends

There is more to storage tiering which includes movement or migration of data (manually or automatically) across various types of storage devices or systems. For example EMC FAST (Fully Automated Storage Tiering), HDS Dynamic Tiering, IBM Easy Tier (and here), and NetApp Virtual Storage Tier (replaces what was known as Automated Storage Tiering) among others.

Likewise there are different types of storage systems or appliances from primary to secondary as well as for backup and archiving.

Then there are also markets or price bands (cost) for various storage systems solutions to meet different needs.

Needless to say there is plenty more to tiered storage and storage tiering for later conversations.

However for now check out the following related links:
Non Disruptive Updates, Needs vs. Wants (Requirements vs. wish lists)
Tiered Hypervisors and Microsoft Hyper-V (Different types or classes of Hypervisors for various needs)
tape summit resources (Using different types or tiers of storage)
EMC VMAX 10K, looks like high-end storage systems are still alive (Tiered storage systems)
Storage comments from the field and customers in the trenches (Various perspectives on tools and technology)
Green IT, Green Gap, Tiered Energy and Green Myths (Energy avoidance vs. energy effectiveness and tiering)
Has SSD put Hard Disk Drives (HDD’s) On Endangered Species List? (Tiered storage systems and devices)
Tiered Storage, Systems and Mediums (Storage Tiering and Tiered Storage)
Cloud, virtualization, Storage I/O trends for 2013 and beyond (Industry Trends and Perspectives)
Amazon cloud storage options enhanced with Glacier (Tiered Cloud Storage)
Garbage data in, garbage information out, big data or big garbage? (How much data are your preserving or hoarding?)Saving Money with Green IT: Time To Invest In Information Factories
I/O Virtualization (IOV) and Tiered Storage Access (Tiered storage access)
EMC VFCache respinning SSD and intelligent caching (Storage and SSD tiering including caching
Green and SASy = Energy and Economic, Effective Storage (Tired storage devices)
EMC Evolves Enterprise Data Protection with Enhancements (Tiered data protection)
Inside the Virtual Data Center (Data Center and Technology Tiering)
Airport Parking, Tiered Storage and Latency (Travel and Technology, Cost and Latency)
Tiered Storage Strategies (Comments on Storage Tiering)
Tiered Storage: Excerpt from Cloud and Virtual Data Storage Networking (CRC Press, see more here)
Using SAS and SATA for tiered storage (SAS and SATA Storage Devices)
The Right Storage Option Is Important for Big Data Success (Big Data and Storage)
VMware vSphere v5 and Storage DRS (VMware vSphere and Storage Tiers)
Tiered Communication and Media Venues (Social and Traditional Media for IT)
Tiered Storage Explained

Ok, nuff said (for now).

Cheers gs

Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press), The Green and Virtual Data Center (CRC Press) and Resilient Storage Networks (Elsevier)
twitter @storageio

July 19, 2013October 1, 2022

As the platters spin, HDD’s for cloud, virtual and traditional storage environments

HDDs for cloud, virtual and traditional storage environments

Storage I/O trends

Updated 1/23/2018

As the platters spin is a follow-up to a recent series of posts on Hard Disk Drives (HDD’s) along with some posts about How Many IOPS HDD’s can do.

HDD and storage trends and directions include among others

HDD’s will continue to be declared dead into the next decade, just as they have been for over a decade, meanwhile they are being enhanced, continued to be used in evolving roles.

hdd and ssd

SSD will continue to coexist with HDD, either as separate or converged HHDD’s. Where, where and how they are used will also continue to evolve. High IO (IOPS) or low latency activity will continue to move to some form of nand flash SSD (PCM around the corner), while storage capacity including some of which has been on tape stays on disk. Instead of more HDD capacity in a server, it moves to a SAN or NAS or to a cloud or service provider. This includes for backup/restore, BC, DR, archive and online reference or what some call active archives.

The need for storage spindle speed and more

The need for faster revolutions per minute (RPM’s) performance of drives (e.g. platter spin speed) is being replaced by SSD and more robust smaller form factor (SFF) drives. For example, some of today’s 2.5” SFF 10,000 RPM (e.g. 10K) SAS HDD’s can do as well or better than their larger 3.5” 15K predecessors can for both IOPS and bandwidth. This is also an example where the RPM speed of a drive may not be the only determination for performance as it has been in the past.

Performance comparison of four different drive types, click to view larger image.

The need for storage space capacity and areal density

In terms of storage enhancements, watch for the appearance of Shingled Magnetic Recording (SMR) enabled HDD’s to help further boost the space capacity in the same footprint. Using SMR HDD manufactures can put more bits (e.g. areal density) into the same physical space on a platter.

Traditional vs. SMR to increase storage areal density capacity

The generic idea with SMR is to increase areal density (how many bits can be safely stored per square inch) of data placed on spinning disk platter media. In the above image on the left is a representative example of how traditional magnetic disk media lays down tracks next to each other. With traditional magnetic recording approaches, the tracks are placed as close together as possible for the write heads to safely write data.

With new recording formats such as SMR along with improvements to read/write heads, the tracks can be more closely grouped together in an overlapping way. This overlapping way (used in a generic sense) is like how the shingles on a roof overlap, hence Shingled Magnetic Recording. Other magnetic recording or storage enhancements in the works include Heat Assisted Magnetic Recording (HAMR) and Helium filed drives. Thus, there is still plenty of bits and bytes room for growth in HDD’s well into the next decade to co-exist and complement SSD’s.

DIF and AF (Advanced Format), or software defining the drives

Another evolving storage feature that ties into HDD’s is Data Integrity Feature (DIF) that has a couple of different types. Depending on which type of DIF (0, 1, 2, and 3) is used; there can be added data integrity checks from the application to the storage medium or drive beyond normal functionality. Here is something to keep in mind, as there are different types or levels of DIF, when somebody says they support or need DIF, ask them which type or level as well as why.

Are you familiar with Advanced Format (AF)? If not you should be. Traditionally outside of special formats for some operating systems or controllers, that standard open system data storage block, page or sector has been 512 bytes. This has served well in the past, however; with the advent of TByte and larger sized drives, a new mechanism is needed. The need is to support both larger average data allocation sizes from operating systems and storage systems, as well as to cut the overhead of managing all the small sectors. Operating systems and file systems have added new partitioning features such as GUID Partition Table (GPT) to support 1TB and larger SSD, HDD and storage system LUN’s.

These enhancements are enabling larger devices to be used in place of traditional Master Boot Record (MBR) or other operating system partition and allocation schemes. The next step, however, is to teach operating systems, file systems, and hypervisors along with their associated tools or drives how to work with 4,096 byte or 4 Kbyte sectors. The advantage will be to cut the overhead of tracking all of those smaller sectors or file system extents and clusters. Today many HDD’s support AF however by default may have 512-byte emulation mode enabled due to lack of operating system or other support.

Intelligent Power Management, moving beyond drive spin down

Intelligent Power Management (IPM) is a collection of techniques that can be applied to vary the amount of energy consumed by a drive, controller or processor to do its work. These include in the case of an HDD slowing the spin rate of platters, however, keep in mind that mass in motion tends to stay in motion. This means that HDD’s once up and spinning do not need as much relative power as they function like a flywheel. Where their power draw comes in is during reading and write, in part to the movement of reading/write heads, however also for running the processors and electronics that control the device. Another big power consumer is when drives spin up, thus if they can be kept moving, however at a lower rate, along with disabling energy used by read/write heads and their electronics, you can see a drop in power consumption. Btw, a current generation 3.5” 4TB 6Gbs SATA HDD consumes about 6-7 watts of power while in active use, or less when in idle mode. Likewise a current generation high performance 2.5” 1.2TB HDD consumes about 4.8 watts of energy, a far cry from the 12-16 plus watts of energy some use as HDD fud.

Hybrid Hard Disk Drives (HHDD) and Solid State Hybrid Drives (SSDHD)

Hybrid HDD’s (HHDD’s) also known as Solid State Hybrid Drives (SSHD) have been around for a while and if you have read my earlier posts, you know that I have been a user and fan of them for several years. However one of the drawbacks of the HHDD’s has been lack of write acceleration, (e.g. they only optimize for reads) with some models. Current and emerging HDDD’s are appearing with a mix of nand flash SLC (used in earlier versions), MLC and eMLC along with DRAM while enabling write optimization. There are also more drive options available as HHDD’s from different manufactures both for desktop and enterprise class scenarios.

The challenge with HHDD’s is that many vendors either do not understand how they fit and compliment their tiering or storage management software tools or simply do not see the value proposition. I have had vendors and others tell me that the HHDD’s don’t make sense as they are too simple, how can they be a fit without requiring tiering software, controllers, SSD and HDD’s to be viable?

Storage I/O trends

I also see a trend similar to when the desktop high-capacity SATA drives appeared for enterprise-class storage systems in the early 2000s. Some of the same people did not see where or how a desktop class product or technology could ever be used in an enterprise solution.

Hmm, hey wait a minute, I seem to recall similar thinking when SCSI drives appeared in the early 90s, funny how some things do not change, DejaVu anybody?

Does that mean HHDD’s will be used everywhere?

Not necessarily, however, there will be places where they make sense, others where either an HDD or SSD will be more practical.

Networking with your server and storage

Drive native interfaces near-term will remain as 6Gbs (going to 12Gbs) SAS and SATA with some FC (you might still find a parallel SCSI drive out there). Likewise, with bridges or interface cards, those drives may appear as USB or something else.

What about SCSI over PCIe, will that catch on as a drive interface? Tough to say however I am sure we can find some people who will gladly try to convince you of that. FC based drives operating at 4Gbs FC (4GFC) are still being used for some environments however most activity is shifting over to SAS and SATA. SAS and SATA are switching over from 3Gbs to 6Gbs with 12Gbs SAS on the roadmaps.

So which drive is best for you?

That depends; do you need bandwidth or IOPS, low latency or high capacity, small low profile thin form factor or feature functions? Do you need a hybrid or all SSD or a self-encrypting device (SED) also known as Instant Secure Erase (ISE), these are among your various options.

Disk drives

Why the storage diversity?

Simple, some are legacy soon to be replaced and disposed of while others are newer. I also have a collection so to speak that get used for various testing, research, learning and trying things out. Click here and here to read about some of the ways I use various drives in my VMware environment including creating Raw Device Mapped (RDM) local SAS and SATA devices.

Other capabilities and functionality existing or being added to HDD’s include RAID and data copy assist; securely erase, self-encrypting, vibration dampening among other abilities for supporting dense data environments.

Where To Learn More

Part 1 of this series – Trends and Content Application Servers
Part 2 of this series – Content application server decisions and testing plans
Part 3 of this series – Test hardware and software configuration
Part 4 of this series – Large file I/O processing
Part 5 of this series – Small file I/O processing
Part 6 of this series – General I/O processing
Part 7 of this series – How HDD continue to evolve over different generations and wrap up
As the platters spin, HDD’s for cloud, virtual and traditional storage environments
How many IOPS can a HDD, HHDD or SSD do?
Hard Disk Drives (HDD) for Virtual Environments
Server and Storage I/O performance and benchmarking tools
Additional Server StorageIO White Papers and Lab Reports, Solutions Briefs and Profiles, Tips and Articles
PDF White Paper version of this post
www.thenvmeplace.com and www.thessdplace.com

Additional learning experiences along with common questions (and answers), as well as tips can be found in Software Defined Data Infrastructure Essentials book.

What This All Means

Do not judge a drive only by its interface, space capacity, cost or RPM alone. Look under the cover a bit to see what is inside in terms of functionality, performance, and reliability among other options to fit your needs. After all, in the data center or information factory not everything is the same.

From a marketing and fun to talk about new technology perspective, HDD’s might be dead for some. The reality is that they are very much alive in physical, virtual and cloud environments, granted their role is changing.

Ok, nuff said, for now.

Greg Schulz – Microsoft MVP Cloud and Data Center Management, VMware vExpert 2010-2017 (vSAN and vCloud). Author of Software Defined Data Infrastructure Essentials (CRC Press), as well as Cloud and Virtual Data Storage Networking (CRC Press), The Green and Virtual Data Center (CRC Press), Resilient Storage Networks (Elsevier) and twitter @storageio. Courteous comments are welcome for consideration. First published on https://storageioblog.com any reproduction in whole, in part, with changes to content, without source attribution under title or without permission is forbidden.

All Comments, (C) and (TM) belong to their owners/posters, Other content (C) Copyright 2006-2024 Server StorageIO and UnlimitedIO. All Rights Reserved. StorageIO is a registered Trade Mark (TM) of Server StorageIO.

July 18, 2013October 17, 2024

Seagate provides proof of life: Enterprise HDD enhancements

Storage I/O trends

Proof of life: Enterprise Hard Disk Drives (HDD’s) are enhanced

Last week while hard disk drive (HDD) competitor Western Digital (WD) was announcing yet another (Velobit) in a string of acquisitions ( e.g. earlier included Stec, Arkeia) and investments (Skyera), Seagate announced new enterprise class HDD’s to their portfolio. Note that it was only two years ago that WD acquired Hitachi Global Storage Technologies (HGST) the disk drive manufacturing business of Hitachi Ltd. (not to be confused with HDS).

Similar to WD expanding their presence in the growing nand flash SSD market, Seagate also in May of this year extended their existing enterprise class SSD portfolio. These enhancements included new drives with 12Gbs SAS interface, along with a partnership (and investment) with PCIe flash card startup vendor Virident. Other PCIe flash SSD card vendors (manufacturers and OEMs) include Cisco, Dell, EMC, FusionIO, HP, IBM, LSI, Micron, NetApp and Oracle among others.

These new Seagate enterprise class HDD’s are designed for use in cloud and traditional data center servers and storage systems. A month or two ago Seagate also announced new ultra-thin (5mm) client (aka desktop) class HDD’s along with a 3.5 inch 4TB video optimized HDD. The video optimized HDD’s are intended for Digital Video Recorders (DVR’s), Set Top Boxes (STB’s) or other similar applications.

What was announced?

Specifically what Seagate announced were two enterprise class drives, one for performance (e.g. 1.2TB 10K) and the other for space capacity (e.g. 4TB).

	Enterprise High Performance 10K.7 (aka formerly known as Savio)	Enterprise Terascale (aka formerly known as constellation)
Class/category	Enterprise / High Performance	Enterprise High Capacity
Form factor	2.5” Small Form Factor (SFF)	3.5”
Interface	6Gbs SAS	6Gbs SATA
Space capacity	1,200GB (1.2TB)	4TB
RPM speed	10,000	5,900
Average seek	2.9 ms	12 ms
DRAM cache	64MB	64MB
Power idle / operating	4.8 watts	5.49 / 6.49 watts
Intelligent Power Management (IPM)	Yes – Seagate PowerChoice	Yes – Seagate PowerChoice
Warranty	Limited 5 years	Limited 3 years
Instant Secure Erase (ISE)	Yes	Optional
Other features	RAID Rebuild assist, Self-Encrypting Device (SED)	Advanced Format (AF) 4K block in addition to standard 512 byte sectors
Use cases	Replace earlier generation 3.5” 15K SAS and Fibre Channel HDD’s for higher performance applications including file systems, databases where SSD are not practical fit.	Backup and data protection, replication, copy operations for erasure coding and data dispersal, active in dormant archives, unstructured NAS, big data, data warehouse, cloud and object storage.

Note the Seagate Terascale has a disk rotation speed of 5,900 (5.9K RPM) which is not a typo given the more traditional 5.4K RPM drives. This slight increase in performance from 5.4K to 5.9K should give when combined with other enhancements (e.g. firmware, electronics) to boost performance for higher capacity workloads.

Let us watch for some performance numbers to be published by Seagate or others. Note that I have not had a chance to try these new drives yet, however look forward to getting my hands on them (among others) sometime in the future for a test drive to add to the growing list found here (hey Seagate and WD, that’s a hint ;) ).

What this all means?

Storage I/O trends

Wait, weren’t HDD’s supposed to be dead or dying?

Some people just like new and emerging things and thus will declare anything existing or that they have lost interest in (or their jobs need it) as old, boring or dead.

For example if you listen to some, they may say nand flash SSD are also dead or dying. For what it is worth, imho nand flash-based SSDs still have a bright future in front of them even with new technologies emerging as they will take time to mature (read more here or listen here).

However, the reality is that for at least the next decade, like them or not, HDD’s will continue to play a role that is also evolving. Thus, these and other improvements with HDD’s will be needed until current nand flash or emerging PCM (Phase Change Memory) among other forms of SSD are capable of picking up all the storage workloads in a cost-effective way.

Btw, yes, I am also a fan and user of nand flash-based SSD’s, in addition to HDD’s and see roles for both as being viable complementing each other for traditional, virtual and cloud environments.

In short, HDD’s will keep spinning (pun intended) for some time granted their roles and usage will also evolve similar to that of tape summit resources.

Storage I/O trends

With this announcement by Seagate along with other enhancements from WD show that the HDD will not only see its 60th birthday, (and here), it will probably also easily see its 70th and not from the comfort of a computer museum. The reason is that there is yet another wave of HDD improvements just around the corner including Shingled Magnetic Recording (SMR) (more info here) along with Heat Assisted Magnetic Recording (HAMR) among others. Watch for more on HAMR and SMR in future posts. With these and other enhancements, we should be able to see a return to the rapid density improvements with HDD’s observed during the mid to late 2000 era when Perpendicular recording became available.

What is up with this ISE stuff is that the same as what Xiotech (e.g. XIO) had?

Is this the same technology that Xiotech (now Xio) referred to the ISE the answer is no. This Seagate ISE is for fast secure erase of data on disk. The benefit of Instant Secure Erase (ISE) is to cut from hours or days the time required to erase a drive for secure disposal to seconds (or less). For those environments that already factor drives erase time as part of those overall costs, this can increase the useful time in service to help improve TCO and ROI.

Wait a minute, aren’t slower RPM’s supposed to be lower performance?

Some of you might be wondering or asking the question of wait, how can a 10,000 revolution per minute (10K RPM) HDD be considered fast vs. a 15K HDD, let alone SSD?

Storage I/O trends

There is a trend occurring with HDD’s that the old rules of IOPS or performance being tied directly to the size and rotational speed (RPM’s) of drives, along with their interfaces. This comes down to being careful to judge a book or in this case a drive by its cover. While RPM’s do have an impact on performance, new generation drives at 10K such as some 2.5” models are delivering performance equal to or better than earlier generation 3.5” 15K device’s.

Likewise, there are similar improvements with 5.4K devices vs. previous generation 7.2K models. As you will see in some of the results found here, not all the old rules of thumbs when it comes to drive performance are still valid. Likewise, keep those metrics that matter in the proper context.

Click on above image to see various performance results

For example as seen in the results (above), the more DRAM or DDR cache on the drives has a positive impact on sequential reads which can be good news if that is what your applications need. Thus, do your homework and avoid judging a device simply by its RPM, interface or form factor.

Other considerations, temperature and vibration

Another consideration is that with increased density of more drives being placed in a given amount of space, some of which may not have the best climate controls, humidity and vibration are concerns. Thus, the importance of drives having vibration dampening or safeguards to keep up performance are important. Likewise, even though drive heads and platters are sealed, there are also considerations that need to be taken care of for humidity in data center or cloud service providers in hot environments near the equator.

If this is not connecting with you, think about how close parts of Southeast Asia and the India subcontinent are to the equator along with the rapid growth and low-cost focus occurring there. Your data center might be temperature and humidity controlled, however others who very focused on cost cutting may not be as concerned with normal facilities best practices.

What type of drives should be used for cloud, virtual and traditional storage?

Good question and one where the answer should be it depends upon what you are trying or need to do (e.g. see previous posts here or here and here (via Seagate)).For example here are some tips for big data storage and storage making decisions in general.

Disclosure

Seagate recently invited me along with several other industry analysts to their cloud storage analyst summit in San Francisco where they covered roundtrip coach airfare, lodging, airport transfers and a nice dinner at the Epic Roast house.

hdd image

I also have received in the past a couple of Momentus XT HHDD (aka SSHD) from Seagate. These are in addition to those that I bought including various Seagate, WD along with HGST, Fujitsu, Toshiba and Samsung (SSD and HDD’s) that I use for various things.

Ok, nuff said (for now).

Cheers gs

Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press), The Green and Virtual Data Center (CRC Press) and Resilient Storage Networks (Elsevier)
twitter @storageio

June 20, 2013January 23, 2019

EPA Energy Star Data Center Storage Draft Specification review

For those of you interested in EPA Energy Star for Data Center Storage, here is an announcement for an upcoming conference call and review of the version 1.0 final draft specification.

There are a few attachments referenced in the following note from EPA that can be accessed here:

EPA_Version 1.0 Storage Final Draft Specification Cover Letter
EPA_Version 1.0 Storage Draft 4 Specification Comment Response Document
EPA_Version 1.0 Storage Final Draft Test Method
EPA_Version 1.0 Storage Final Draft Specification

Dear ENERGY STAR® Data Center Storage Partner or Other Interested Party:

Please see the attached important correspondence from the U.S. Environmental Protection Agency concerning the ENERGY STAR Version 1.0 Data Center Storage Final Draft Specification and Test Method. EPA will host a webinar on July 9, 2013 from 3:00 5:00 PM Eastern Time to discuss the documents with stakeholders. Please RSVP for the webinar to storage@energystar.gov no later than July 5, 2013.

Thank you for your continued support of the ENERGY STAR program.

For more information, visit:www.energystar.gov

This message was sent to you on behalf of ENERGY STAR. Each ENERGY STAR partner organization must have at least one primary contact receiving e-mail to maintain partnership. If you are no longer working on ENERGY STAR, and wish to be removed as a contact, please update your contact status in your MESA account. If you are not a partner organization and wish to opt out of receiving e-mails, you may call the ENERGY STAR Hotline at 1-888-782-7937 and request to have your mass mail settings changed. Unsubscribing means that you will no longer receive program-wide or product-specific e-mails from ENERGY STAR.

Ok, nuff said.

Cheers gs

Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press), The Green and Virtual Data Center (CRC Press) and Resilient Storage Networks (Elsevier)
twitter @storageio

April 23, 2013June 7, 2022

Spring SNW 2013, Storage Networking World Recap

Storage I/O trends

A couple of weeks ago I attended the spring 2013 Storage Networking World (SNW) in Orlando Florida. Talking with SNIA Chairman Wayne Adams and SNIA Director Leo Legar this was the 28th edition of the US SNW (two shows a year), plus the international ones. While I have not been to all 28 of the US SNWs, I have been to a couple of dozen SNWs in the US, Europe and Brazil going back to around 2001 as an attendee, main stage as well as breakout, and tutorial presenter (see here and here).

SNW image

For the spring 2013 SNW I was there for a mix of meetings, analyst briefings, attending the expo, doing some podcasts (see below), meeting with IT professionals (e.g. customers), VARs, vendors along with presenting three sessions (you can download them and others backup, restore, BC, DR and archiving).

Some of the buzz and themes heard included big data was a little topic at the event, while cloud was in the conversations, dedupe and data footprint reduction (DFR) do matter for some people and applications. However also a common theme with customers including Media and Entertainment (M&E) is that not everything can be duped thus other DFR approaches are needed.

There was some hype in and around hybrid storage along with storage hypervisors, which was also an entertaining panel discussion with HDS (Claus Mikkelsen aka @YoClaus), Datacore, IBM and Virstro.

The theme of that discussion seemed for the most part to gravitate towards realities of storage virtualization and less about the hypervisor hype. Some software defined marketing hype I heard is that it is impossible to spend more than a million dollars on a server today. I guess with the applicable caveats, qualifiers and context that could be true, however I also know some vendors and customers that would say otherwise.

Lunch
Lunchtime at SNW Spring 2013

Not surprisingly, there was an increase in vendors wanting to jump on the software defined and object storage bandwagons; however, customers tended to be curious at best, confused or concerned otherwise. Speaking of object storage, check out this podcast discussion with Cleversafe customer Justin Stottlemyer of Shutterfly and his 80PB environment.

In addition to Cleversafe, heard from Astute (if you need fast iSCSI storage check them out), Avere has a new NAS for dummies book out, Exablox a storage system startup with emphasis on scalability, ease of use and NAS access and hybrid storage Tegile. Also, check out SwifTest for generating application workloads and measurement that had their customer Go Daddy presenting at the event. A couple of others to keep an eye on include Raxco with their thin provision storage reclamation tool, and Infinio with their NAS acceleration for VMware software tools among others.

backup, restore, BC, DR and archiving

Here are the three presentations that I did while at the event:

Analyst Perspective: Increase Your Return on Innovation (The New ROI) With Data Management and Dedupe
There is no such thing as an information recession with more data to move, process and store, however there are economic challenges. Likewise, people and data are living longer and getting larger which requires leveraging data footprint reduction (DFR) techniques on a broader focus. It is time to move upstream finding and fixing things at the source to reduce the downstream impact of expanding data footprints, enabling more to be done with what you have.

Analyst Perspective: Metrics that Matter – Meritage of Data Management and Data Protection
Not everything in the data center or information factory is the same. This session recaps and builds off the morning increase your ROI with data footprint and data management session while setting the stage for the rethinking data protection (backup, BC and DR). Are you maximizing the return on innovation in how using new tools and technology in new ways, vs. using new tools in old ways? Also discussed performance capacity planning, forecasting analysis in cloud, virtual and physical environments. Without metrics that matter, you are flying blind, or perhaps missing opportunities to further drive your return on innovation and return on investment.

Analyst Perspective: Time to Rethink Data Protection Including BC and DR
When it comes to today’s data centers and information factories including physical, virtual and cloud, everything is not the same, so why treat business continuance (BC), disaster recovery (DR) and data protection in general the same? Simply using new tools, technologies and techniques in the same old ways is no longer a viable option. Since there is no such thing as a data or information recession, yet there are economic and budget challenges, along with new or changing threat risks, now is the time to review data protection including BC and DR including using new technologies in new ways.

You can view the complete SNW USA spring 2013 agenda here.

Podcasts are also available on

Here are links to some podcasts from spring 2013 SNW:
Stottlemyer of Shutterfly and object storage discussion
Dave Demming talking tech education from SNW Spring 2013
Farley Flies into SNW Spring 2013
Talking with Tony DiCenzo at SNW Spring 2013
SNIA Spring 2013 update with Wayne Adams
SNIA’s new SPDEcon conference

Also, check out these podcasts from fall 2012 US and Europe SNWs:
Ben Woo on Big Data Buzzword Bingo and Business Benefits
Networking with Bruce Ravid and Bruce Rave
Industry trends and perspectives: Ray Lucchesi on Storage and SNW
Learning with Leo Leger of SNIA
Meeting up with Marty Foltyn of SNIA
Catching up with Quantum CTE David Chapa (Now with Evault)
Chatting with Karl Chen at SNW 2012
SNW 2012 Wayne’s World
SNW Podcast on Cloud Computing
HDS Claus Mikkelsen talking storage from SNW Fall 2012

Storage I/O trends

What this all means?

While busy, I liked this edition of SNW USA in that it had a great agenda with diversity and balance of speaker sessions (some tutorials, some vendors, some IT customers, and some analysts) vs. too many of one specific area.

In addition to the agenda and session length, the venue was good, big enough, however not spread out so much to cause loss of the buzz and energy of the event.

This SNW had some similar buzz or energy as early versions granted without the hype and fanfare of a startup industry or focus area (that would be some of the other events today)

Should SNW go to a once a year event?

While it would be nice to have a twice a year venue for convenience, practicality and budgets say once would be enough given all the other conferences and venues on the agenda (or that could be).

The next SNW USA will be October 15 to 17 2013 in Long Beach California, and Europe in Frankfurt Germany October 29-30 2013.

Thanks again to all the attendees, participants, vendor exhibitors, event organizers and SNIA, SNW/Computerworld staffs for another great event.

Ok, nuff said

Cheers
Gs

Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press), The Green and Virtual Data Center (CRC Press) and Resilient Storage Networks (Elsevier)
twitter @storageio

January 15, 2013November 3, 2024

Thanks for viewing StorageIO content and top 2012 viewed posts

StorageIO industry trends cloud, virtualization and big data

2012 was a busy year (it was our 7th year in business) along with plenty of activity on StorageIOblog.com as well as on the various syndicate and other sites that pickup our content feed (https://storageioblog.com/RSSfull.xml).

Excluding traditional media venues, columns, articles, web casts and web site visits (StorageIO.com and StorageIO.TV), StorageIO generated content including posts and pod casts have reached over 50,000 views per month (and growing) across StorageIOblog.com and our partner or syndicated sites. Including both public and private, there were about four dozen in-person events and activities not counting attending conferences or vendor briefing sessions, along with plenty of industry commentary. On the twitter front, plenty of activity there as well closing in on 7,000 followers.

Thank you to everyone who have visited the sites where you will find StorageIO generated content, along with industry trends and perspective comments, articles, tips, webinars, live in person events and other activities.

In terms of what was popular on the StorageIOblog.com site, here are the top 20 viewed posts in alphabetical order.

Amazon cloud storage options enhanced with Glacier
Announcing SAS SANs for Dummies book, LSI edition
Are large storage arrays dead at the hands of SSD?
AWS (Amazon) storage gateway, first, second and third impressions
EMC VFCache respinning SSD and intelligent caching
Hard product vs. soft product
How much SSD do you need vs. want?
Oracle, Xsigo, VMware, Nicira, SDN and IOV: IO IO its off to work they go
Is SSD dead? No, however some vendors might be
IT and storage economics 101, supply and demand
More storage and IO metrics that matter
NAD recommends Oracle discontinue certain Exadata performance claims
New Seagate Momentus XT Hybrid drive (SSD and HDD)
PureSystems, something old, something new, something from big blue
Researchers and marketers dont agree on future of nand flash SSD
Should Everything Be Virtualized?
SSD, flash and DRAM, DejaVu or something new?
What is the best kind of IO? The one you do not have to do
Why FC and FCoE vendors get beat up over bandwidth?
Why SSD based arrays and storage appliances can be a good idea

Moving beyond the top twenty read posts on StorageIOblog.com site, the list quickly expands to include more popular posts around clouds, virtualization and data protection modernization (backup/restore, HA, BC, DR, archiving), general IT/ICT industry trends and related themes.

I would like to thank the current StorageIOblog.com site sponsors Solarwinds (management tools including response time monitoring for physical and virtual servers) and Veeam (VMware and Hyper-V virtual server backup and data protection management tools) for their support.

Thanks again to everyone for reading and following these and other posts as well as for your continued support, watch for more content on the above and other related and new topics or themes throughout 2013.

Btw, if you are into Facebook, you can give StorageIO a like at facebook.com/storageio (thanks in advance) along with viewing our newsletter here.

Ok, nuff said.

Cheers gs

Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press, 2011), The Green and Virtual Data Center (CRC Press, 2009), and Resilient Storage Networks (Elsevier, 2004)

twitter @storageio

January 14, 2013December 4, 2019

Summary, EMC VMAX 10K, high-end storage systems stayin alive

StorageIO industry trends cloud, virtualization and big data

This is a follow-up companion post to the larger industry trends and perspectives series from earlier today (Part I, Part II and Part III) pertaining to today’s VMAX 10K enhancement and other announcements by EMC, and the industry myth of if large storage arrays or systems are dead.

The enhanced VMAX 10K scales from a couple of dozen up to 1,560 HDDs (or mix of HDD and SSDs). There can be a mix of 2.5 inch and 3.5 inch devices in different drive enclosures (DAE). There can be 25 SAS based 2.5 inch drives (HDD or SSD) in the 2U enclosure (see figure with cover panels removed), or 15 3.5 inch drives (HDD or SSD) in a 3U enclosure. As mentioned, there can be all 2.5 inch (including for vault drives) for up to 1,200 devices, all 3.5 inch drives for up to 960 devices, or a mix of 2.5 inch (2U DAE) and 3.5 inch (3U DAE) for a total of 1,560 drives.

Image of EMC 2U and 3U DAE for VMAX 10K via EMC
Image courtesy EMC

Note carefully in the figure (courtesy of EMC) that the 2U 2.5 inch DAE and 3U 3.5 inch DAE along with the VMAX 10K are actually mounted in a 3rd cabinet or rack that is part of today’s announcement.

Also note that the DAE’s are still EMC; however as part of today’s announcement, certain third-party cabinets or enclosures such as might be found in a collocation (colo) or other data center environment can be used instead of EMC cabinets. The VMAX 10K can however like the VMAX 20K and 40K support external storage virtualized similar to what has been available from HDS (VSP/USP) and HP branded Hitachi equivalent storage, or using NetApp V-Series or IBM V7000 in a similar way.

As mentioned in one of the other posts, there are various software functionality bundles available. Note that SRDF is a separate license from the bundles to give customers options including RecoverPoint.

Check out the three post industry trends and perspectives posts here, here and here.

Ok, nuff said.

Cheers gs

Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press, 2011), The Green and Virtual Data Center (CRC Press, 2009), and Resilient Storage Networks (Elsevier, 2004)

twitter @storageio

January 14, 2013December 24, 2020

EMC VMAX 10K, looks like high-end storage systems are still alive (part II)

StorageIO industry trends cloud, virtualization and big data

This is the second in a multi-part series of posts (read first post here) looking at if large enterprise and legacy storage systems are dead, along with what todays EMC VMAX 10K updates mean.

Thus on January 14 2013 it is time for a new EMC Virtual Matrix (VMAX) model 10,000 (10K) storage system. EMC has been promoting their January 14 live virtual event for a while now. January significance is that is when (along with May or June) is when many new systems, solutions or upgrades are made on a staggered basis.

Historically speaking, January and February, along with May and June is when you have seen many of the larger announcements from EMC being made. Case in point, back in February of 2012 VFCache was released, then May (2012) in Las Vegas at EMCworld there were 42 announcements made and others later in the year.

Click here to see images of the car stuffing or click here to watch a video.

Let’s not forget back in February of 2012 VFCache was released, and go back to January 2011 there was the record-setting event in New York City complete with 26 people being compressed, deduped, singled instanced, optimized, stacked and tiered into a mini cooper (Coop) automobile (read and view more here).

Now back to the VMAX 10K enhancements

As an example of a company, product family and specific storage system model, still being alive is the VMAX 10K. Although this announcement by EMC is VMAX 10K centric, there is also a new version of the Enginuity software (firmware, storage operating system, valueware) that runs across all VMAX based systems including VMAX 20K and VMAX 40K. Read here, here and here and here to learn more about VMAX and Enginuity systems in general.

Some main themes of this announcement include Tier 1 reliability, availability and serviceability (RAS) storage systems functionality at tier 2 pricing for traditional, virtual and cloud data centers.

Some other themes of this announcement by EMC:

Flexible, scalable and resilient with performance to meet dynamic needs

Support private, public and hybrid cloud along with federated storage models

Simplified decision-making, acquisition, installation and ongoing management

Enable traditional, virtual and cloud workloads

Complement its siblings VMAX 40K, 20K and SP (Service Provider) models

Note that the VMAX SP is a model configured and optimized for easy self-service and private cloud, storage as a service (SaaS), IT as a Service (ITaaS) and public cloud service providers needing multi-tenant capabilities with service catalogs and associated tools.

So what is new with the VMAX 10K?

It is twice as fast (per EMC performance results) as earlier VMAX 10K by leveraging faster 2.8GHz Intel westmere vs. earlier 2.5GHz westmere processors. In addition to faster cores, there are more, from 4 to 6 on directors, from 8 to 12 on VMAX 10K engines. The PCIe (Gen 2) IO busses remain unchanged as does the RapidIO interconnect. RapidIO used for connecting nodes and engines, while PCIe is used for adapter and device connectivity. Memory stays the same at up to 128GB of global DRAM cache, along with dual virtual matrix interfaces (how the nodes are connected). Note that there is no increase in the amount of DRAM based cache memory in this new VMAX 10K model.

This should prompt the question of for traditional cache centric or dependent for performance storage systems such as VMAX, how much are they now CPU and their associated L1 / L2 cache dependent or effective? Also how much has the Enginuity code under the covers been enhanced to leverage the multiple cores and threads thus shifting from being cache memory dependent processor hungry.

Also new with the updated VMAX 10K include:

Support for dense 2.5 inch drives, along with mixed 2.5 inch and 3.5 inch form factor devices with a maximum of 1,560 HDDs. This means support for 2.5 inch 1TB 7,200 RPM SAS HDDs, along with fast SAS HDDs, SLC/MLC and eMLC solid state devices (SSD) also known as electronic flash devices (EFD). Note that with higher density storage configurations, good disk enclosures become more important to counter or prevent the effects of drive vibration, something that leading vendors are paying attention to and so should customers.

EMC is also with the VMAX 10K adding support for certain 3rd party racks or cabinets to be used for mounting the product. This means being able to mount the VMAX main system and DAE components into selected cabinets or racks to meet specific customer, colo or other environment needs for increased flexibility.

For security, VMAX 10K also supports Data at Rest Encryption or (D@RE) which is implemented within the VMAX platform. All data encrypted on every drive, every drive type (drive independent) within the VMAX platform to avoid performance impacts. AES 256 fixed block encryption with FIPS 140-2 validation (#1610) using embedded or external key management including RSA Key Manager. Note that since the storage system based encryption is done within the VMAX platform or controller, not only is the encrypt / decrypt off-loaded from servers, it also means that any device from SSD to HDD to third-party storage arrays can be encrypted. This is in contrast to drive based approaches such as self encrypting devices (SED) or other full drive encryption approaches. With embedded key management, encryption keys kept and managed within the VMAX system while external mode leverages RSA key management as part of a broader security solution approach.

In terms of addressing ease of decision-making and acquisition, EMC has bundled core Enginuity software suite (virtual provisioning, FTS and FLM, DCP (dynamic cache partitioning), host I/O limits, Optimizer/virtual LUN and integrated RecoverPoint splitter). In addition are bundles for optimization (FAST VP, EMC Unisphere for VMAX with heat map and dashboards), availability (TimeFinder for VMAX 10K) and migration (Symmetrix migration suite, Open Replicator, Open Migrator, SRDF/DM, Federated Live Migration). Additional optional software include RecoverPoint CDP, CRR and CLR, Replication Manager, PowerPath, SRDF/S, SRDF/A and SRDF/DM, Storage Configuration Advisor, Open Replicator with Dynamic Mobility and ControlCenter/ProSphere package.

Who needs a VMAX 10K or where can it be used?

As the entry-level model of the VMAX family, certain organizations who are growing and looking for an alternative to traditional mid-range storage systems should be a primary opportunity. Assuming the VMAX 10K can sell at tier-2 prices with a focus of tier-1 reliability, feature functionality, and simplification while allowing their channel partners to make some money, then EMC can have success with this product. The challenge however will be helping their direct and channel partner sales organizations to avoid competing with their own products (e.g. high-end VNX) vs. those of others.

Consolidation of servers with virtualization, along with storage system consolidation to remove complexity in management and costs should be another opportunity with the ability to virtualize third-party storage. I would expect EMC and their channel partners to place the VMAX 10K with its storage virtualization of third-party storage as an alternative to HDS VSP (aka USP/USPV) and the HP XP P9000 (Hitachi based) products, or for block storage needs the NetApp V-Series among others. There could be some scenarios where the VMAX 10K could be positioned as an alternative to the IBM V7000 (SVC based) for virtualizing third-party storage, or for larger environments, some of the software based appliances where there is a scaling with stability (performance, availability, capacity, ease of management, feature functionality) concerns.

Another area where the VMAX 10K could see action which will fly in the face of some industry thinking is for deployment in new and growing managed service providers (MSP), public cloud, and community clouds (private consortiums) looking for an alternative to open source based, or traditional mid-range solutions. Otoh, I cant wait to hear somebody think outside of both the old and new boxes about how a VMAX 10K could be used beyond traditional applications or functionality. For example filling it up with a few SSDs, and then balance with 1TB 2.5 inch SAS HDD and 3.5 inch 3TB (or larger when available) HDDs as an active archive target leveraging the built-in data compression.

How about if EMC were to support cloud optimized HDDs such as the Seagate Constellation Cloud Storage (CS) HDDs that were announced late in 2012 as well as the newer enterprise class HDDs for opening up new markets? Also keep in mind that some of the new 2.5 inch SAS 10,000 (10K) HDDs have the same performance capabilities as traditional 3.5 inch 15,000 (15K) RPM drives in a smaller footprint to help drive and support increased density of performance and capacity with improved energy effectiveness.

How about attaching a VMAX 10K with the right type of cost-effective (aligned to a given scenario) SSD or HDDs or third-party storage to a cluster or grid of servers that are running OpenStack including Swift, CloudStack, Basho Riak CS, Celversafe, Scality, Caringo, Ceph or even EMCs own ATMOS (that supports external storage) for cloud storage or object based storage solutions? Granted that would be thinking outside of the current or new box thinking to move away from RAID based systems in favor or low-cost JBOD storage in servers, however what the heck, let’s think in pragmatic ways.

Will EMC be able to open new markets and opportunities by making the VMAX and its Enginuity software platform and functionality more accessible and affordable leveraging the VMAX 10K as well as the VMAX SP? Time will tell, after all, I recall back in the mid to late 90s, and then again several times during the 2000s similar questions or conversations not to mention the demise of the large traditional storage systems.

Continue reading about what else EMC announced on January 14 2013 in addition to VMAX 10K updates here in the next post in this series. Also check out Chucks EMC blog to see what he has to say.

Ok, nuff said (for now).

Cheers gs

Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press, 2011), The Green and Virtual Data Center (CRC Press, 2009), and Resilient Storage Networks (Elsevier, 2004)

twitter @storageio

January 14, 2013December 24, 2020

EMC VMAX 10K, looks like high-end storage systems are still alive

StorageIO industry trends cloud, virtualization and big data

This is the first in a multi-part series of posts looking at if large enterprise and legacy storage systems are dead, along with what todays EMC VMAX 10K updates means.

EMC has announced an upgrade, refresh or new version of their previously announced Virtual matrix (VMAX) 10,000 (10K), part of the VMAX family of enterprise class storage systems formerly known as DMX (Direct Matrix) and Symmetrix. I will get back to more coverage on the VMAX 10K and other EMC enhancements in a few moments in part two and three of this series.

Have you heard the industry myth about the demise or outright death of traditional storage systems? This has been particularly the case for high-end enterprise class systems, which by the way which were first, declared dead back in the mid-1990s then at the hands of emerging mid-range storage systems.

Enterprise class storage systems include EMC VMAX, Fujitsu Eternus DX8700, HDS, HP XP P9000 based on the HDS high-end product (OEM from HDS parent Hitachi Ltd.). Note that some HPers or their fans might argue that the P10000 (formerly known as 3PAR) declared as tier 1.5 should also be on the list; I will leave that up to you to decide.

Let us not forget the IBM DS8000 series (whose predecessors was known as the ESS and VSS before that); although some IBMers will tell you that XIV should also be in this list. High-end enterprise class storage systems such as those mentioned above are not alone in being declared dead at the hands of new all solid-state devices (SSD) and their startup vendors, or mixed and hybrid-based solutions.

Some are even declaring dead due to new SSD appliances or systems, and by storage hypervisor or virtual storage array (VSA) the traditional mid-range storage systems that were supposed to have killed off the enterprise systems a decade ago (hmm, DejaVu?).

The mid-range storage systems include among others block (SAN and DAS) and file (NAS) systems from Data Direct Networks (DDN), Dell Complement, EqualLogic and MD series (Netapp Engenio based), EMC VNX and Isilon, Fujitsu Eternus, and HDS HUS mid-range formerly known as AMS. Let us not forget about HP 3PAR or P2000 (DotHill based) or P6000 (EVA which is probably being put out to rest). Then there are the various IBM products (their own and what they OEM from others), NEC, NetApp (FAS and Engenio), Oracle and Starboard (formerly known as Reldata). Note that there are many startups that could be in the above list as well if they were not considering the above to be considered dead, thus causing themselves to also be extinct as well, how ironic ;).

What are some industry trends that I am seeing?

Some vendors and products might be nearing the ends of their useful lives

Some vendors, their products and portfolios continue to evolve and expand

Some vendors and their products are moving into new or adjacent markets

Some vendors are refining where and what to sell when and to who

Some vendors are moving up market, some down market

Some vendors are moving into new markets, others are moving out of markets

Some vendors are declaring others dead to create a new market for their products

One size or approach or technology does not fit all needs, avoid treating all the same

Leverage multiple tools and technology in creative ways

Maximize return on innovation (the new ROI) by using various tools, technologies in ways to boost productivity, effectiveness while removing complexity and cost

Realization that cutting cost can result in reduced resiliency, thus look for and remove complexity with benefit of removing costs without compromise

Storage arrays are moving into new roles, including as back-end storage for cloud, object and other software stacks running on commodity servers to replace JBOD (DejaVu anyone?).

Keep in mind that there is a difference between industry adoption (what is talked about) and customer deployment (what are actually bought and used). Likewise there is technology based on GQ (looks and image) and G2 (functionality, experience).

There is also an industry myth that SSD cannot or has not been successful in traditional storage systems which in some cases has been true with some products or vendors. Otoh, some vendors such as EMC, NetApp and Oracle (among others) are having good success with SSD in their storage systems. Some SSD startup vendors have been more successful on both the G2 and GQ front, while some focus on the GQ or image may not be as successful (or at least yet) in the industry adoption vs. customer deployment game.

For the above mentioned storage systems vendors and products (among others), or at least for most of them there is still have plenty of life in them, granted their role and usage is changing including in some cases being found as back-end storage systems behind servers running virtualization, cloud, object storage and other storage software stacks. Likewise, some of the new and emerging storage systems (hardware, software, valueware, services) and vendors have bright futures while others may end up on the where are they now list.

Are high-end enterprise class or other storage arrays and systems dead at the hands of new startups, virtual storage appliances (VSA), storage hypervisors, storage virtualization, virtual storage and SSD?

Are large storage arrays dead at the hands of SSD?

Have SSDs been unsuccessful with storage arrays (with poll)?

Here are links to two polls where you can cast your vote.

Cast your vote and see results of if large storage arrays and systems are dead here.

Cast your vote and see results of if SSD has not been successful in storage systems.

So what about it, are enterprise or large storage arrays and systems dead?

Perhaps in some tabloids or industry myths (or that some wish for) or in some customer environments, as well as for some vendors or their products that can be the case.

However, IMHO for many other environments (and vendors) the answer is no, granted some will continue to evolve from legacy high-end enterprise class storage systems to mid-range or to appliance or VSA or something else.

There is still life many of the storage systems architectures, platforms and products that have been declared dead for over a decade.

Continue reading about the specifics of the EMC VMAX 10K announcement in the next post in this series here. Also check out Chucks EMC blog to see what he has to say.

Ok, nuff said (for now).

Cheers gs

Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press, 2011), The Green and Virtual Data Center (CRC Press, 2009), and Resilient Storage Networks (Elsevier, 2004)

twitter @storageio

January 8, 2013November 26, 2023

Congratulations Imation and Nexsan, are there any independent storage vendors left?

StorageIO industry trends cloud, virtualization and big data

Last week Imation, the company that is known for making CDs, DVDs, magnetic tape and in the past floppy disk (diskettes) bought Nexsan, a company known for the SATA and SAS storage products.

Imation is also (or should be) owns the TDK and Memorex names (remember is it real or is it Memorex? If not Google it). They also have had for several years removable hard disk drive (RHDD) products including the Odyssey (I am in the process of retiring mine), as well as partnership with the former ProStor for RDX and having acquired some of the assets of ProStor namely their RDX based InifiVault storage appliance. Imation has also been involved in some other things including USB and other forms of flash-based solid state devices (SSD), as well as a couple of years (2007) they launched cloud backup with DataGuard before cloud backup had become a popular buzzword topic.

Imation has also divested parts of its business over past several years including some medical related (X-ray stuff) to Kodak who occupies part of the headquarter building in Oakdale MN, or at least last time I looked when driving by there on way from the airport. They also divested their SAN lab with some of the staff going to Glasshouse and other pieces going to Lion bridge (an independent test lab company). Beyond traditional of data protection, backup/restore and archiving media or mediums from consumer to large-scale enterprise, Imation has also been involved in other areas involving recording. Imation also has done some other recent acquisitions around dedupe (Nine Technologies).

For its part, Nexsan has extended their portfolio from SATA and SAS products, AutoMaid Intelligent Power Management (IPM) which gives benefits of variable power and performance without the penalties of first generation MAID type products. Read more about IPM and related themes here, here and here. Nexsan also supports NAS and iSCSI solutions in addition to their archive and content or object storage focused Assureon product they bought a few years ago.

This is a good acquisition for both companies as it gives Imation a new set of products to sell into their existing accounts and channels. It also can leverage Nexsan’s channel and solution selling skills giving them (Nexsan) a bigger brand and large parent for credibility (not that they did not have that in the past).

Here are is a link to a piece done by Dave Raffo that includes some comments and perspectives from me. To say that the synergy here is about archiving or selling SSD or storage would be too easy and miss a bigger potential. That potential is Imation has been in the business of selling consumable accessories for protecting and preserving data. Notice I said consumable accessories which in the past has meant manufacturing consumable media (e.g. Floppy disks or discs, CD, DVDs, magnetic tapes) as well as partnering around flash and HDDs.

In many environments from small to large to super-sized cloud and service providers, some types of storage systems including some of those that Nexsan sells can be considered a consumable media or medium taking over the role that tape, CDs or DVDs have been used in the pat. Instead of using tape or CDs or DVDs to protect the HDDs and SSDs based data, HDD based solutions are being used for disk-to-disk (D2D) protection (part of modernizing data protection). D2D is being done as appliances, or in conjunction with cloud and object storage system software stacks such as OpenStack swift, Basho Riak CS, CloudStack, Cleversafe, Ceph, Caringo and a list of others, in addition to appliances such as EMC ATMOS among others than can support 3rd party storage device as consumable mediums. Keep in mind that there is no such thing as a data or information recession, and people and data are living longer and getting larger, both for big data and little data.

The big if in this acquisition which IMHO is a fair price for both parties based on realistic valuations is if they can collective execute on it. This means that Imation and Nexsan need to leverage each other’s strengths, address any weakness, close gaps and expand into each other’s markets, channels and sell the entire portfolio as opposed to becoming singular focused on a particular area tool or technology. If Imation can execute on this and Nexsan leverages their new parent, the result should be moving from the roughly $85M USD sales to $100M+ then $125M then $150M and so forth over the next couple of years.

Even if Imation keeps maintains revenues or a slight increase, which would also be a good deal for them, granted the industry pundits may not agree, so let us see where this is in a few years. However if Imation can grow the Nexsan business, then it would become a very good deal. Thus, IMHO the price valuation for the deal has the risk built into, something like when NetApp bought the Engenio business unit from LSI back in 2011 for about $480M USD. At that time, Engenio was doing about $705M USD in revenue and seen by many industry pundits as being on the decline, thus a lower valuation. For its part, NetApp, has been executing maintaining the revenue of that business unit with some expansion, thus their execution so far is being rewarding for taking the risk.

Let us see if Imation can do the same thing.

Now, does that mean that Nexsan was the last of the independent storage vendors left?

Hardly, after all there is still Xiotech, excuse me, Xio as they changed their name as part of a repackaging, relaunch and downsizing. There is DotHill who supplies partners such HP, or Dothills former partner supplier InfoTrend. If you are an Apple fan then you might know about Promise, if not, you should. Lets not forget about Data Direct Networks (DDN) that is still independent and at around $200M (give or take several million) in revenue, are very much still around.

How about Xyratex, sure they make the enclosures and appliances that many others use in their solutions, however they also have a storage solutions business focused on scale out, clustered and grid NAS based on Lustre. There are some others that I am drawing a blank on now (if you read this and are one of them, chime in) in addition to all the new or current generation of startups (you can chime in as well to let people know who you are to be bought).

There is still consolidation taking place, both of smaller vendors by mid-sized vendors, mid-sized vendors by big vendors, big vendors by mega vendors, and startups by established.

Again congratulations to both Imation and Nexsan, let us see who or what is next on the 2013 mergers and acquisition list, as well as who will join the where are they now club.

Disclosure: Nexsan has been a StorageIO client in the past; however, Imation has not been a client, although they have bought me lunch before here in the Stillwater, MN area.

With Imation having their own brand name and identity, not to mention TDK and Memorex, now I have to wonder will Nexsan be real or Memorex or something else? ;)

Ok, nuff said.

Cheers gs

Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press, 2011), The Green and Virtual Data Center (CRC Press, 2009), and Resilient Storage Networks (Elsevier, 2004)

twitter @storageio

January 7, 2013May 18, 2021

Cloud conversations: Gaining cloud confidence from insights into AWS outages

StorageIO industry trends cloud, virtualization and big data

This is the first of a two-part industry trends and perspectives series looking at how to learn from cloud outages (read part II here).

In case you missed it, there were some public cloud outages during the recent Christmas 2012-holiday season. One incident involved Microsoft Xbox (view the Microsoft Azure status dashboard here) users were impacted, and the other was another Amazon Web Services (AWS) incident. Microsoft and AWS are not alone, most if not all cloud services have had some type of incident and have gone on to improve from those outages. Google has had issues with different applications and services including some in December 2012 along with a Gmail incident that received covered back in 2011.

For those interested, here is a link to the AWS status dashboard and a link to the AWS December 24 2012 incident postmortem. In the case of the recent AWS incident which affected users such as Netflix, the incident (read the AWS postmortem and Netflix postmortem) was tied to a human error. This is not to say AWS has more outages or incidents vs. others including Microsoft, it just seems that we hear more about AWS when things happen compared to others. That could be due to AWS size and arguably market leading status, diversity of services and scale at which some of their clients are using them.

Btw, if you were not aware, Microsoft Azure is more than just about supporting SQLserver, Exchange, SharePoint or Office, it is also an IaaS layer for running virtual machines such as Hyper-V, as well as a storage target for storing data. You can use Microsoft Azure storage services as a target for backing up or archiving or as general storage, similar to using AWS S3 or Rackspace Cloud files or other services. Some backup and archiving AaaS and SaaS providers including Evault partner with Microsoft Azure as a storage repository target.

When reading some of the coverage of these recent cloud incidents, I am not sure if I am more amazed by some of the marketing cloud washing, or the cloud bashing and uniformed reporting or lack of research and insight. Then again, if someone repeats a myth often enough for others to hear and repeat, as it gets amplified, the myth may assume status of reality. After all, you may know the expression that if it is on the internet then it must be true?

Images licensed for use by StorageIO via
Atomazul / Shutterstock.com

Have AWS and public cloud services become a lightning rod for when things go wrong?

Here is some coverage of various cloud incidents:

Huffington post coverage of February 2011 Google Gmail incident
Microsoft Azure coverage by Allthingsd.com
Neowin.net covering Microsoft Xbox incident
Google’s Gmail blog coverage of Gmail outage
Forbes article Amazon AWS Takes Down Netflix on Christmas Eve
Over at Performance Critical Apps they assert the AWS incident was Netflix fault
From The Virtualization Practice: Amazon Ruining Public Cloud Computing?
Here is Netflix architect Adrian Cockcroft discussing the recent incident
From StorageIOblog Amazon Web Services (AWS) and the Netflix Fix?
From CRN, here are some cloud service availability status via Nasuni

The above are a small sampling of different stories, articles, columns, blogs, perspectives about cloud services outages or other incidents. Assuming the services are available, you can Google or Bing many others along with reading postmortems to gain insight into what happened, the cause, effect and how to prevent in the future.

Do these recent incidents show a trend of increased cloud outages? Alternatively, do they say that the cloud services are being used more and on a larger basis, thus the impacts become more known?

Perhaps it is a mix of the above, and like when a magnetic storage tape gets lost or stolen, it makes for good news or copy, something to write about. Granted there are fewer tapes actually lost than in the past, and far fewer vs. lost or stolen laptops and other devices with data on them. There are probably other reasons such as the lightning rod effect given how much industry hype around clouds that when something does happen, the cynics or foes come out in force, sometimes with FUD.

Similar to traditional hardware or software based product vendors, some service providers have even tried to convince me that they have never had an incident, lost or corrupted or compromised any data, yeah, right. Candidly, I put more credibility and confidence in a vendor or solution provider who tells me that they have had incidents and taken steps to prevent them from recurring. Granted those steps might be made public while others might be under NDA, at least they are learning and implementing improvements.

As part of gaining insights, here are some links to AWS, Google, Microsoft Azure and other service status dashboards where you can view current and past situations.

AWS service status dashboard
Bluehost server status dashboard
Google App status dashboard
HP cloud service status console (requires login)
Microsoft Azure service status dashboard
Microsoft Xbox service status dashboard
Rackspace service status dashboards

What is your take on IT clouds? Click here to cast your vote and see what others are thinking about clouds.

Ok, nuff said for now (check out part II here )

Disclosure: I am a customer of AWS for EC2, EBS, S3 and Glacier as well as a customer of Bluehost for hosting and Rackspace for backups. Other than Amazon being a seller of my books (and my blog via Kindle) along with running ads on my sites and being an Amazon Associates member (Google also has ads), none of those mentioned are or have been StorageIO clients.

Cheers gs

Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press, 2011), The Green and Virtual Data Center (CRC Press, 2009), and Resilient Storage Networks (Elsevier, 2004)

twitter @storageio

December 18, 2012November 26, 2023

December 2012 StorageIO Update news letter

December 2012 News letter

Welcome to the December 2012 year end edition of the StorageIO Update news letter including a new format and added content.

You can get access to this news letter via various social media venues (some are shown below) in addition to StorageIO web sites and subscriptions.

Click on the following links to view the December 2012 edition as brief (short HTML sent via Email) version, or the full HTML or PDF versions.

Visit the news letter page to view previous editions of the StorageIO Update.

You can subscribe to the news letter by clicking here.

Enjoy this edition of the StorageIO Update news letter, let me know your comments and feedback.

Nuff said for now

Cheers
Gs

Greg Schulz – Author Cloud and Virtual Data Storage Networking (CRC Press), The Green and Virtual Data Center (CRC Press) and Resilient Storage Networks (Elsevier)
twitter @storageio

Nand flash SATA SSD in a DDR3 DIMM slot?

What’s inside the press release

Is SATADIMM memory bus nand flash SSD storage?

Future of nand flash in DRAM DIMM sockets

Share this:

DRAM, DIMM, DDR3, nand flash memory, SSD, stating what’s often assumed

Share this:

Tiering technology and the right data center tool for a given task

Technology tiering is all around you

Technology tiering in and around the data center

Lets focus on storage for a bit (pun intended)

Share this:

HDDs for cloud, virtual and traditional storage environments

HDD and storage trends and directions include among others

The need for storage spindle speed and more

The need for storage space capacity and areal density

DIF and AF (Advanced Format), or software defining the drives

Intelligent Power Management, moving beyond drive spin down

Hybrid Hard Disk Drives (HHDD) and Solid State Hybrid Drives (SSDHD)

Networking with your server and storage

So which drive is best for you?

Why the storage diversity?

Where To Learn More

What This All Means

Share this:

Proof of life: Enterprise Hard Disk Drives (HDD’s) are enhanced

What was announced?

What this all means?

Wait, weren’t HDD’s supposed to be dead or dying?

What is up with this ISE stuff is that the same as what Xiotech (e.g. XIO) had?

Wait a minute, aren’t slower RPM’s supposed to be lower performance?

Other considerations, temperature and vibration

What type of drives should be used for cloud, virtual and traditional storage?

Disclosure

Share this:

Share this:

Share this:

Share this:

Share this:

Share this:

Share this:

Share this:

Share this:

Share this: