This is a follow-up companion post to the larger industry trends and perspectives series from earlier today (Part I, Part II and Part III) pertaining to today’s VMAX 10K enhancement and other announcements by EMC, and the industry myth of if large storage arrays or systems are dead.
The enhanced VMAX 10K scales from a couple of dozen up to 1,560 HDDs (or mix of HDD and SSDs). There can be a mix of 2.5 inch and 3.5 inch devices in different drive enclosures (DAE). There can be 25 SAS based 2.5 inch drives (HDD or SSD) in the 2U enclosure (see figure with cover panels removed), or 15 3.5 inch drives (HDD or SSD) in a 3U enclosure. As mentioned, there can be all 2.5 inch (including for vault drives) for up to 1,200 devices, all 3.5 inch drives for up to 960 devices, or a mix of 2.5 inch (2U DAE) and 3.5 inch (3U DAE) for a total of 1,560 drives.
Note carefully in the figure (courtesy of EMC) that the 2U 2.5 inch DAE and 3U 3.5 inch DAE along with the VMAX 10K are actually mounted in a 3rd cabinet or rack that is part of today’s announcement.
Also note that the DAE’s are still EMC; however as part of today’s announcement, certain third-party cabinets or enclosures such as might be found in a collocation (colo) or other data center environment can be used instead of EMC cabinets. The VMAX 10K can however like the VMAX 20K and 40K support external storage virtualized similar to what has been available from HDS (VSP/USP) and HP branded Hitachi equivalent storage, or using NetApp V-Series or IBM V7000 in a similar way.
As mentioned in one of the other posts, there are various software functionality bundles available. Note that SRDF is a separate license from the bundles to give customers options including RecoverPoint.
Ok, nuff said.
All Comments, (C) and (TM) belong to their owners/posters, Other content (C) Copyright 2006-2013 StorageIO All Rights Reserved